| 超声振动研磨加工模型理论研究 |
| |
| 引用本文： | 张成光,缪娟,刘传绍,张成红.超声振动研磨加工模型理论研究[J].煤矿机械,2007,28(2):96-97. |
| |
| 作者姓名： | 张成光 缪娟 刘传绍 张成红 |
| |
| 作者单位： | 1. 河南理工大学,河南,焦作,454010
2. 哈尔滨工程大学,哈尔滨,150001 |
| |
| 摘 要： | 建立了超声振动研磨加工硬脆材料去除理论模型,从理论上分析了超声振动研磨加工硬脆材料的去除原理和加工优势,详细地分析了加工间隙、磨粒大小和超声波声压对材料的去除率和加工质量的影响,研究表明,超声振动研磨加工在最佳组合条件下能够有效提高工件表面质量。
|
| 关 键 词： | 理论模型 超声波研磨 去除量 |
| 文章编号： | 1003-0794（2007）02-0096-02 |
| 修稿时间： | 2006-07-03 |
Theoretic Study of Model Based on Ultrasonic Abrasive Hardness-brittle Materials |
| |
| ZHANG Cheng-guang,MIAO Juan,LIU Chuan-shao,ZHANG Cheng-hong.Theoretic Study of Model Based on Ultrasonic Abrasive Hardness-brittle Materials[J].Coal Mine Machinery,2007,28(2):96-97. |
| |
| Authors: | ZHANG Cheng-guang MIAO Juan LIU Chuan-shao ZHANG Cheng-hong |
| |
| Affiliation: | 1. Henan Polytechnic University, Jiaozuo 454010, China; 2. Harbin Engineering University, Harbin 150001, China |
| |
| Abstract: | Establishing brittle and hardness materials removal theoretical model based on ultrasonic abrasive machining, the theoretical model analyzing the removal law and machining superiority, detailing the influence of removal rate and surface quality based on machining gap, grain size and ultrasonic pressure, improving workpiece surface quality based on ultrasonic abrasive at the best combination. |
| |
| Keywords: | theoretical model ultrasonic abrasive removal rate |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
