| 基于UG/NX的二次开发技术实现起重机主梁的参数化设计 |
| |
| 引用本文： | 许艳,李戍斌,周兵.基于UG/NX的二次开发技术实现起重机主梁的参数化设计[J].煤矿机械,2011(6):241-243. |
| |
| 作者姓名： | 许艳 李戍斌 周兵 |
| |
| 作者单位： | 湖南大学机械与运载工程学院,长沙,410082 |
| |
| 摘 要： | 以UG为设计平台,创建了主梁参数化模型。通过二次开发,定制了设计系统的个性化菜单,使用Visual C++和UG/Open API编写应用程序,组成了主梁参数化建模系统。在UG环境下,当用户在对话框中输入主梁的设计参数和结构参数后,系统将自动生成完全符合用户要求的主梁模型。
|
| 关 键 词： | UG 主梁 参数化设计 二次开发 |
Parametric Design of Crane Girder Based on UG/NX Secondary Development |
| |
| XU Yan,LI Shu-bin,ZHOU Bing.Parametric Design of Crane Girder Based on UG/NX Secondary Development[J].Coal Mine Machinery,2011(6):241-243. |
| |
| Authors: | XU Yan LI Shu-bin ZHOU Bing |
| |
| Affiliation: | (College of Mechanical and Vehicle Engineering,Hunan University,Changsha 410082,China) |
| |
| Abstract: | Using UG/NX as platform,this paper finished parametric modeling of girder.By secondary development,characteristic menu for design system was established.Using VC and UG/OPEN API,application program was compiled,which form parameterized modeling system.Under UG environment,system will automatically generate girder completely in accordance with design demand after girder parameters and structure parameters are input in customer dialog box. |
| |
| Keywords: | UG girder parametric design secondary develop |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
