| 冷喷涂Cu粉气固两相流数值模拟研究 |
| |
| 引用本文： | 刘传绍,吴中雷.冷喷涂Cu粉气固两相流数值模拟研究[J].煤矿机械,2011(6):90-92. |
| |
| 作者姓名： | 刘传绍 吴中雷 |
| |
| 作者单位： | 河南理工大学机械与动力工程学院,河南,焦作,454003 |
| |
| 基金项目： | 无锡市国际科技合作计划项目 |
| |
| 摘 要： | 通过在冷喷涂条件下对喷枪内部流场进行数值模拟,得到气相流场中温度场、压力场和速度场分布,给出了气固两相流场中颗粒相轨道化描述。结果表明:气体温度和气体压力在喷管中先升高后降低,气体速度在喷管中持续升高,颗粒温度和速度表现出与气体良好的跟随性,先急剧升高后稳定升高,故适当提高气体预热温度能更好地提高颗粒的入射速度和得到较高的沉积率。
|
| 关 键 词： | 冷喷涂 气固两相流 数值模拟 涂层 |
Numerical Simulation of Gas-Particle Two Phase Flow in Cold Spraying Cu Powder |
| |
| LIU Chuan-shao,WU Zhong-lei.Numerical Simulation of Gas-Particle Two Phase Flow in Cold Spraying Cu Powder[J].Coal Mine Machinery,2011(6):90-92. |
| |
| Authors: | LIU Chuan-shao WU Zhong-lei |
| |
| Affiliation: | (School of Mechanical and Power Engineering,Henan Polytechnic University,Jiaozuo 454000,China) |
| |
| Abstract: | Numerical simulation of gas-particle two phase flow in cold gun spraying gun is carried out.The distributions of temperature field,pressure field and velocity field in internal gas phase flow field are obtained.The particle tracks of discrete phase are described.The simulation results show that gas pressure and temperature increase at first and then decrease in nozzle,but gas velocity continues to rise.And particle temperature and velocity show a good following with gas which increased slowly after sharp rise at first.So higher shooting velocity and better coating deposition may be obtained if preheat temperature increases. |
| |
| Keywords: | cold spray gas-particle two phase flow numerical simulation coating deposition |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
