| 基于UG螺纹收尾的处理方法与技巧 |
| |
| 引用本文： | 程启森.基于UG螺纹收尾的处理方法与技巧[J].煤矿机械,2022(2). |
| |
| 作者姓名： | 程启森 |
| |
| 作者单位： | 安徽工业职业技术学院 |
| |
| 摘 要： | 针对UG螺纹命令绘制螺纹收尾存在的问题,分析了2种退刀形式形成的2种螺纹收尾类型,研究了基于UGNX软件对螺纹收尾的4种处理方法,总结了4种方法的优缺点,为其他同类软件处理螺纹收尾问题提供参考。
|
| 关 键 词： | UG 螺纹收尾 螺旋线 扫掠 布尔运算 |
Processing Method and Skill of Thread Ending Based on UG |
| |
| Cheng Qisen.Processing Method and Skill of Thread Ending Based on UG[J].Coal Mine Machinery,2022(2). |
| |
| Authors: | Cheng Qisen |
| |
| Affiliation: | (Anhui Industry Polytechnic,Tongling 244000,China) |
| |
| Abstract: | Aiming at the problems existing in drawing the end of thread with UG thread command,analyzed two types of thread end formed by two kinds of retracting forms, and four methods of processing the end of thread based on UGNX software were studied, the advantages and disadvantages of four methods were summarized. It can provides a reference for other similar softwares to process the end of thread. |
| |
| Keywords: | UG end of thread spiral sweep Boolean operation |
| 本文献已被 维普 等数据库收录！ |
|
