首页 | 本学科首页   官方微博 | 高级检索  
     

内排屑深孔钻削切屑变形与切削力实验研究
引用本文:李琦,于勇波,裴宏伟,郭成.内排屑深孔钻削切屑变形与切削力实验研究[J].煤矿机械,2004(4):27-29.
作者姓名:李琦  于勇波  裴宏伟  郭成
作者单位:1. 东北大学,机械工程与自动化学院,辽宁,沈阳,110004
2. 沈阳金博真空工程有限公司,辽宁,沈阳,110168
摘    要:通过内排屑深孔钻削加工过程的实验 ,讨论了切削变形和钻削切削力与钻头切削部几何参数、切削用量等的关系 ,并得到了切削力的经验公式。实验表明 :各段切削刃对切屑变形的影响趋势基本相同 ,为内排屑深孔钻切削机理研究、切削参数数据库建立和进一步开发在线检测系统奠定了基础。

关 键 词:内排屑深孔钻削  切屑变形  切削力
文章编号:1003-0794(2004)04-0027-03
修稿时间:2004年2月12日

The investigation on chip deformation and cutting forces of BTA deep hole drilling
LI Qi,YU Yong-bo,PEI Hong-wei,GUO Cheng.The investigation on chip deformation and cutting forces of BTA deep hole drilling[J].Coal Mine Machinery,2004(4):27-29.
Authors:LI Qi  YU Yong-bo  PEI Hong-wei  GUO Cheng
Affiliation:LI Qi~1,YU Yong-bo~2,PEI Hong-wei~2,GUO Cheng~1
Abstract:In this paper, the relation between the chip deformation and cutting axial forces with cutting tool geometric parameters and cutting parameters are discussed, and the empirical formula is received. It is found that the chip deformation cut by center edge is the largest, and chip deformation tendency cut by the edges is about the same. This research laid down a solid basis for cutting mechanisms, cutting parameter database and further developing an on-line monitoring and control system for BTA deep hole drilling processes.
Keywords:BTA deep hole drilling  chip deformation  cutting force
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号