| 基于数控成形磨削圆柱齿轮砂轮修形的一种光顺处理方法 |
| |
| 引用本文： | 张洛平,贺红霞.基于数控成形磨削圆柱齿轮砂轮修形的一种光顺处理方法[J].煤矿机械,2004(12):98-99. |
| |
| 作者姓名： | 张洛平 贺红霞 |
| |
| 作者单位： | 河南科技大学,机电工程学院,河南,洛阳,471003 |
| |
| 摘 要： | 介绍了成形法磨削圆柱齿轮的加工特点和最小二乘圆弧及其连续圆弧的求解过程。在曲线已离散化的基础上 ,通过对离散点用连续圆弧替代最小二乘圆弧拟合 ,解决了圆柱齿轮数控成形磨削砂轮轴向修形的光顺问题和逼近精度 ,并通过实例验证此种方法切实可行
|
| 关 键 词： | 数控成形磨削 砂轮修整 光顺处理 最小二乘圆 连续圆弧 |
| 文章编号： | 1003-0794(2004)12-0098-02 |
| 修稿时间： | 2004年9月17日 |
A smoothing treatment method for the wheel dressing on the basis of numerical control mold grinding cylinder gear |
| |
| ZHANG Luo-ping,HE Hong-xia.A smoothing treatment method for the wheel dressing on the basis of numerical control mold grinding cylinder gear[J].Coal Mine Machinery,2004(12):98-99. |
| |
| Authors: | ZHANG Luo-ping HE Hong-xia |
| |
| Abstract: | The machining characteristics of mold grinding cylinder gear and the solving process of least square circle arc and continuous circular arc are introduced in this paper. On the based of curve discretization,the discrete points are interpolated using continuous circular arc instead of least square circle arc, which resolved the smoothing problem and approximate accuracy to shape axile sectional of grinding wheel for numerical control mold grinding cylinder gear. The example illustrates the method is effective in the use. |
| |
| Keywords: | numerical control mold grinding grinding wheel dressing smoothing treatment least square circle arc continuous circular arc |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
