首页 | 本学科首页   官方微博 | 高级检索  
     

碱性工业废渣在湿法脱硫中的消溶特性
引用本文:赵建立,樊兆燕,李英杰,韩奎华,路春美.碱性工业废渣在湿法脱硫中的消溶特性[J].煤炭学报,2011,36(4):676-680.
作者姓名:赵建立  樊兆燕  李英杰  韩奎华  路春美
作者单位:山东大学 燃煤污染物减排国家工程实验室,山东 济南 250061
基金项目:山东省科技攻关计划资助项目(2007GG20006013)
摘    要:利用基于pH值静态方式的消溶实验系统对碱性工业废渣如白泥、电石渣、碱渣、盐泥等进行消溶特性研究。结果表明:pH值对碱性工业废渣消溶影响较大,随着pH值减小,消溶率增大;粒径对消溶率的影响最大,粒径越小消溶率越大,最佳粒径范围为0~0.097 mm;在反应温度30、40、50 ℃下进行的实验表明,温度对碱性工业废渣消溶特性影响较小。消溶特性研究表明,4种碱性工业废渣最终消溶率由大到小依次为:电石渣>白泥>碱渣>盐泥。

关 键 词:碱性工业废渣  湿法脱硫  消溶  脱硫剂  
收稿时间:2010-08-16

Dissolution characteristics of alkaline industrial wastes in wet flue gas desulphurization
Abstract:The dissolution characteristics of alkaline industrial wastes such as white sludge,carbide slag,alkali slag and salt slag from different sources were studied by pH stat method in various parameters.The results show that the lower the pH value is,the higher the dissolution rate is;particle size is the direct function of dissolution rate,the smaller the size is,the higher the dissolution rate is,the optimal particle size is 0~0.097 mm;the reaction temperature has slightly influence on alkaline wastes dissolution.The experiments show that the final dissolution rate of the alkaline wastes in the descending order are carbide slag,white sludge,alkali slag,and salt slag.
Keywords:alkaline industrial wastes  wet flue gas desulphurization  dissolution  desulfurization sorbent
点击此处可从《煤炭学报》浏览原始摘要信息
点击此处可从《煤炭学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号