| 某钒钛磁铁矿选铁工艺流程研究 |
| |
| 引用本文： | 张俊辉,张渊,杨永涛.某钒钛磁铁矿选铁工艺流程研究[J].矿产综合利用,2008(6). |
| |
| 作者姓名： | 张俊辉 张渊 杨永涛 |
| |
| 作者单位： | 1. 江西理工大学资源与环境工程学院,江西,赣州,341000;中国地质科学院矿产综合利用研究所,四川,成都,610041
2. 中国地质科学院矿产综合利用研究所,四川,成都,610041 |
| |
| 摘 要： | 针对该低品位钒钛磁铁矿石开展了多种选铁工艺流程的对比试验研究,结果表明:采用10~0mm的粗粒抛尾—阶段磨矿阶段选别工艺是该矿石选铁的最佳工艺流程。
|
| 关 键 词： | 钒钛磁铁矿 粗粒抛尾 阶段磨矿阶段选别 |
Research on the Technological Flowsheets for Iron Separation from a low-grade Vanadiferous Titanomagnetite Ore |
| |
| ZHANG Jun-hui,ZHANG Yuan,YANG Yong-tao.Research on the Technological Flowsheets for Iron Separation from a low-grade Vanadiferous Titanomagnetite Ore[J].Multipurpose Utilization of Mineral Resources,2008(6). |
| |
| Authors: | ZHANG Jun-hui ZHANG Yuan YANG Yong-tao |
| |
| Abstract: | Aiming at the ore property of a low-grade vanadiferous titanomagnetite ore,many kinds of technological flowsheets for iron separation have been researched,and test results obtained by different technological methods were compared in this paper.The test results showed that "discarding coarser size tailings in the range of 10～0mm—stage-grinding and stage-separation" is the optimal technological flowsheet for iron separation from the ore. |
| |
| Keywords: | Vanadiferous titanomagnetite Decarding the tailings at the coarser size condition Stage-grinding and stage-separation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
