铜铅锌硫矿提高铜回收率、精矿质量试验研究 |
| |
引用本文: | 张晓民,李恒.铜铅锌硫矿提高铜回收率、精矿质量试验研究[J].有色金属(选矿部分),2019(2):11-16. |
| |
作者姓名: | 张晓民 李恒 |
| |
作者单位: | 西安建筑科技大学资源工程学院陕西省黄金与资源重点实验室;西安天宙矿业科技集团有限公司 |
| |
基金项目: | 构造蚀变岩型石英脉含碳强氧化金矿石的预处理选冶技术研究 |
| |
摘 要: | 针对某铜铅锌硫矿实际生产中存在的问题:铜浮选作业中有13.35%的铜损失在铜尾矿中;硫精矿含锌1.10%,杂质锌含量超标;锌精矿产品质量不合格(锌品位为18.38%),对铜浮选作业进行了多流程方案对比开路试验以及主要工艺条件的调整与优化,可获得铜精矿铜品位15.11%,铜回收率92.30%指标,较现场铜回收率提高了5.65%。采用抑锌浮硫工艺流程,可将现场硫精矿中锌品位由1.16%降至0.41%。对现场锌精矿采用不再磨、再磨工艺均显著提高了锌品位(锌品位最高可达48.71%),同时对该流程下浮选尾矿可作为单独的硫精矿产品进行回收。
|
关 键 词: | 铜铅锌硫矿 硫精矿 锌精矿 铜回收率 |
收稿时间: | 2018/10/8 0:00:00 |
修稿时间: | 2019/2/18 0:00:00 |
Experimental study on improving copper recovery and concentrate quality of copper lead and zinc sulfide ore |
| |
Authors: | zhangxiaomin and liheng |
| |
Affiliation: | Xi''an University of Architecture and Technology,Xi''an University of Architecture and Technology |
| |
Abstract: | In this paper , the actual production Problems of a copper lead-zinc-sulfur ore: 13.35 % of the copper loss in the copper tailings; the sulfur concentrate contains 1.10% of the zinc, the impurity zinc content excess; the quality of the zinc concentrate product is not qualified (zinc grade is 18.38%). Multi-process scheme comparison and open-circuit test for copper flotation operation and adjustment and optimization of main process conditions,The copper grade of copper concentrate was 15.11%, and the copper recovery was 92.30%, which was 5.65% higher than the on-site copper recovery . Using the sulfur suppression and zinc flotation, the impurity zinc grade of on-site sulfur concentrate can be reduced from 1.16% to 0.41%. The on-site zinc concentrate has significantly improved the zinc grade by adopting non-grinding and regrinding flowsheet (zinc grade up to 48.71%), while the flotation tailings can be recycled as a separate sulfur concentrate product. |
| |
Keywords: | Copper lead zinc sulfide ore sulfur concentrate zinc concentrate copper recovery |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《有色金属(选矿部分)》浏览原始摘要信息 |
|
点击此处可从《有色金属(选矿部分)》下载全文 |