| 国产与进口TBM滚刀刀圈显微组织与磨损机理的对比分析 |
| |
| 引用本文： | 赵金华,费学婷,袁国,张占杰,吴志生.国产与进口TBM滚刀刀圈显微组织与磨损机理的对比分析[J].矿山机械,2012(8):120-124. |
| |
| 作者姓名： | 赵金华 费学婷 袁国 张占杰 吴志生 |
| |
| 作者单位： | 太原科技大学材料科学与工程学院;北方重工集团有限公司全断面掘进机国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室 |
| |
| 基金项目： | 国家973计划项目(2010CB736007) |
| |
| 摘 要： | 笔者将某国产滚刀刀圈的化学成分、硬度、冲击韧性及显微组织与进口产品进行了对比分析,结果表明,TBM在硬岩掘进过程中,国产滚刀刀圈磨损以显微切削转变为疲劳剥落机制为主,进口滚刀刀圈的磨损则以切削犁沟变形应变疲劳为主。
|
| 关 键 词： | 滚刀刀圈 TBM 显微组织 磨损机理 |
Comparison and analysis of domestic and imported TBM cutter ring in microstructure and wear mechanism |
| |
| ZHAO Jinhua,FEI Xueting,YUAN Guo,ZHANG Zhanjie,WU Zhisheng.Comparison and analysis of domestic and imported TBM cutter ring in microstructure and wear mechanism[J].Mining & Processing Equipment,2012(8):120-124. |
| |
| Authors: | ZHAO Jinhua FEI Xueting YUAN Guo ZHANG Zhanjie WU Zhisheng |
| |
| Affiliation: | 1School of Materials Science & Engineering, Taiyuan University of Science & Technology, Taiyuan 030024, Shanxi, China 2State Key Laboratory of Tunnel Boring Machine, Northern Heavy Industries Group Co., Ltd. 3State Key Laboratory of Rolling & Automation, Northeastern University |
| |
| Abstract: | The paper compared and analyzed the domestic and imported TBM cutter rings in chemical composition, hardness, impact toughness and microstructure. The analysis results showed when TBM worked on high hardness rocks, the abrasion of the domestic cutter rings were characterized by micro-cutting transforming into fatigue flaking, while the abrasion of the imported ones were characterized by micro-ploughing transforming into strain fatigue. |
| |
| Keywords: | cutter ring TBM microstructure abrasion mechanism |
| 本文献已被 CNKI 等数据库收录！ |
|
