首页 | 本学科首页   官方微博 | 高级检索  
     

半固态铝合金设计与试验研究
引用本文:徐骏,田战峰,石力开,刘玉芹,樊中云. 半固态铝合金设计与试验研究[J]. 稀有金属, 2004, 28(2): 358-361
作者姓名:徐骏  田战峰  石力开  刘玉芹  樊中云
作者单位:1. 北京有色金属研究总院国家有色金属复合材料工程技术研究中心,北京,100088
2. 英国Brunel,大学,UB8 3PH,英国
基金项目:国家高技术研究发展计划 (863计划 )资助项目 (2 0 0 2AA3 3 60 80 )
摘    要:在半固态加工的基本原理基础上采用合金热力学计算方法设计了Al-Si-Mg系半固态新合金,并进行了初步的试验验证。结果表明,新合金在铸态和半固态下的组织和力学性能特点与预测结果基本一致,并且发现适当增加Mg,si含量可以改善铝合金半固态加工性能和提高合金的力学性能。这对进一步开发新型的实用半固态合金具有一定的指导作用。

关 键 词:合金设计 半固态金属 铝合金
文章编号:0258-7076(2004)02-0358-04

Design and Experimental Investigations of Semisolid Aluminum Alloys
Xu Jun ,Tian Zhanfeng,Shi Likai,Liu Yuqin,Fan Zhongyun. Design and Experimental Investigations of Semisolid Aluminum Alloys[J]. Chinese Journal of Rare Metals, 2004, 28(2): 358-361
Authors:Xu Jun   Tian Zhanfeng  Shi Likai  Liu Yuqin  Fan Zhongyun
Affiliation:Xu Jun 1*,Tian Zhanfeng1,Shi Likai1,Liu Yuqin2,Fan Zhongyun2
Abstract:The development of semi-solid metal (SSM) processing was limited by using conventional cast aluminium alloys. Therefore one of the main researches for SSM processing is to design special alloys for SSM processing in order to realize its full potential. In this paper, the new SSM alloys of Al-Si-Mg ternary system were designed and optimized by thermodynamic calculations with the consideration of basic principle of SSM processing, and tested. The result shows that microstructures and properties of the new alloys both in as-cast and semisolid states are quite correspond with the results of thermodynamic calculations. It is found that the processing properties of semisolid alloys can be improved as the Mg and Si contents are increased properly.
Keywords:alloy design  semisolid metals  aluminum alloys
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号