| TRIP钢热变形后冷却工艺的优化 |
| |
| 引用本文： | 张迎晖,赵鸿金,康永林.TRIP钢热变形后冷却工艺的优化[J].钢铁,2007,42(3):52-55. |
| |
| 作者姓名： | 张迎晖 赵鸿金 康永林 |
| |
| 作者单位： | 1. 江西理工大学材料与化学工程学院,江西,赣州,341000
2. 北京科技大学材料科学与工程学院,北京,100083 |
| |
| 摘 要： | 采用正交实验的方法在热模拟机上进行了TRIP钢热变形后冷却工艺的优化研究.结果表明,热变形后控制铁素体相变的慢速冷却的速度及控制贝氏体相变的快速冷却的速度对最终组织的组成影响较大;在分析实验数据的基础上,提出了TRIP钢轧后最佳冷却工艺.
|
| 关 键 词： | TRIP钢 残余奥氏体 冷却工艺 优化 |
| 文章编号： | 0449-749X（2007）03-0052-04 |
| 修稿时间： | 2006-08-23 |
Research on Optimization of Cooling Process for TRIP Steel After Hot-Deformation |
| |
| ZHANG Ying-hui,ZHAO Hong-jin,KANG Yong-lin.Research on Optimization of Cooling Process for TRIP Steel After Hot-Deformation[J].Iron & Steel,2007,42(3):52-55. |
| |
| Authors: | ZHANG Ying-hui ZHAO Hong-jin KANG Yong-lin |
| |
| Affiliation: | 1. Faeulty of Material and Chemieal Engineering, Jiangxi University of Seienee and Teehnology, Ganzhou 341000, Jiangxi, China; 2. Sehool of Material Seienee and Engineering, University of Seienee and Teehnology Beijing, Beijing 100083, China |
| |
| Abstract: | The optimization of cooling process for TRIP steel after hot-deformation was studied by orthogonal test on hot simulation experiment machine. The results show that both the slow cooling rate to control ferrite transformation and the rapid cooling rate to control bainite transformation affect the microstructure of TRIP steel obviously. An optimized cooling process of TRIP steel was put forward based on analysis of experimental data. |
| |
| Keywords: | TRIP steel retained austenite cooling process optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
