首页 | 本学科首页   官方微博 | 高级检索  
     

N/Al比值对A508-3钢的组织和性能的影响
引用本文:胡本芙,卜勇,吴承建,林岳萌.N/Al比值对A508-3钢的组织和性能的影响[J].钢铁,1999,34(1):39-43.
作者姓名:胡本芙  卜勇  吴承建  林岳萌
作者单位:1. 北京科技大学
2. 第一重型机械集团公司
摘    要:研究了核电站压力容器用A508-3钢的酸溶氮与酸溶铝的不同比值(N/Al)对其组织和性能的影响。结果表明,N/Al比值增大,钢的塑性提高,但强度变化不大。韧脆转变温度(FATT)和无塑性转变温度(NDTT)降低。当N/Al比值为0.33 ̄0.54时,FATT和NDTT明显降低;当N/Al比值为0.54 ̄0.81时,FATT和NDTT基本不变。显微组织分析结果表明,随N/Al比值的增大,晶粒细化;贝

关 键 词:压力容器用钢  N/Al比值  晶粒度  碳化物

EFFECT OF N/Al RATIO ON MICROSTRUCTURE AND PROPERTIES OF A508-3 STEEL FOR NUCLEAR REACTOR PRESSURE VESSEL
HU Benfu,PU Yong,WU Chengjian,LIN Yuemeng.EFFECT OF N/Al RATIO ON MICROSTRUCTURE AND PROPERTIES OF A508-3 STEEL FOR NUCLEAR REACTOR PRESSURE VESSEL[J].Iron & Steel,1999,34(1):39-43.
Authors:HU Benfu  PU Yong  WU Chengjian  LIN Yuemeng
Affiliation:HU Benfu PU Yong WU Chengjian (University of Science and Technology Beijing) LIN Yuemeng (No 1 Heavy Machinery Group Corp )
Abstract:The effect of the acid soluble nitrogen/acid soluble aluminum ratio on the microstructure and properties of A508 3 steel for nuclear reactor pressure vessel has been investigated The experimental results show that the strength of the steel little changes as N/Al ratio increases,whereas the ductility increases and the FATT and NDTT decrease The FATT and NDTT decrease more obviously as N/Al ratio varies from 0 33 to 0 54,when N/Al ratio are 0 54 and 0 81 the FATT and NDTT not change The microstructure shows that as N/Al ratio increasing the grain refines,the size of bainite ferrite plates and the average diameter of carbides decrease,the carbides become more disperisive
Keywords:pressure  vessel steel  N/Al ratio  grain grade  carbide  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号