|
|||||
|
|
| 热轧带钢局部高点对冷轧带钢板形的影响 | |
| 引用本文： | 李俊洪,戚向东,连家创,刘献东,姜正连.热轧带钢局部高点对冷轧带钢板形的影响[J].钢铁,2004,39(6):47-50. |
| 作者姓名： | 李俊洪 戚向东 连家创 刘献东 姜正连 |
| 作者单位： | 1. 攀钢钢铁研究院,攀枝花,617000 2. 燕山大学轧机研究所,秦皇岛,066004 3. 宝钢热轧部,上海,200941 |
| 摘 要： | 热轧带钢局部高点对冷轧带钢板厚和内应力分布具有重要影响。采用B3样条函数拟合带材厚度横向分布，定量研究热轧来料局部高点对冷轧带钢板厚和内应力分布的影响。研究结果表明：轧后带钢局部高点高度及附加张应力的大小与来料高点高度成正比，随总轧制压下率的增大而减小。 |
| 关 键 词： | 热轧带钢 冷轧带钢 局部高点 内应力分布 附加张应力 |
Influence of Hot Strip Local High Points on Flatness and Profile of Cold Strip |
|
| LI Junhong ,QI Xiangdong ,LIAN Jiachuang ,LIU Xiandong ,JIANG Zhenglian.Influence of Hot Strip Local High Points on Flatness and Profile of Cold Strip[J].Iron & Steel,2004,39(6):47-50. | |
| Authors: | LI Junhong QI Xiangdong LIAN Jiachuang LIU Xiandong JIANG Zhenglian |
| Affiliation: | LI Junhong 1,QI Xiangdong 2,LIAN Jiachuang 2,LIU Xiandong 3,JIANG Zhenglian 3 |
| Abstract: | The hot strip local high points have very important influence on the internal stress distribution and thickness of cold strip. The B 3 spline function is used to fit the lateral distribution of strip thickness. The influence of hot strip local high points on cold strip internal stress distribution and thickness was quantitatively analyzed. Results indicate the local high point height and additional tension stress of rolled strip are proportional to local high point initial height of strip, decrease as rolling reduction ratio increases. |
| Keywords: | hot strip cold strip local high points internal stress distribution additional tension stress |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |