| 复吹提钒的工艺参数应用研究 |
| |
| 引用本文： | 丁满堂,汪波.复吹提钒的工艺参数应用研究[J].四川冶金,2006,28(5):4-6. |
| |
| 作者姓名： | 丁满堂 汪波 |
| |
| 作者单位： | 攀钢提钒炼钢厂 |
| |
| 摘 要： | 对复吹提钒转炉底吹参数的应用情况研究，提出了最佳的底吹N2流量与压力，确保了提钒工序降低铁损0．4％、降低钒渣中的TFe含量2％以上，提高钒渣V2O5品位1．3％左右，并且半钢C]相应高0．2％，残钒也降低。另外，复吹炉龄从1000-2000炉提高到4173炉。
|
| 关 键 词： | 提钒 复吹转炉 工艺参数 |
| 收稿时间： | 2006-05-30 |
| 修稿时间： | 2006年5月30日 |
RESEARCH ON TECHNOLOGICAL PARAMMETER FOR VANADIUM RECOVERY IN COMBINED BLOWING CONVERTER |
| |
| Ding Mantang,Wang Bo.RESEARCH ON TECHNOLOGICAL PARAMMETER FOR VANADIUM RECOVERY IN COMBINED BLOWING CONVERTER[J].Sichuan Metallurgy,2006,28(5):4-6. |
| |
| Authors: | Ding Mantang Wang Bo |
| |
| Affiliation: | Vanadium Reoovery and Steelmaking Plant of Panzhihua Steel |
| |
| Abstract: | Based on practice of bottom blowing technological parammeter for vanadiun recovery m combined blowing converter, raised out the optimum N2 parammetero The results show that iron loss was decreased 0.4 %, content of TFe in the vanadium slag was decreased over 2 %, content of V205 in vanadium slag was rised 1.3 %, and C] in semi-steel was also rised above 0.2 % ; in addition V ] in semi-steel was been lower corresponding. Combined blowing furnace life was from 1000- 2000 to 4173 in the corresponding furnace campaign. |
| |
| Keywords: | Vanadium Recovery combined blown converter process parameters |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
