| TC4钛合金线性摩擦焊接头组织及性能研究 |
| |
| 引用本文： | 张学军,马铁军,李能,刘文慧.TC4钛合金线性摩擦焊接头组织及性能研究[J].钛工业进展,2012,29(4):26-30. |
| |
| 作者姓名： | 张学军 马铁军 李能 刘文慧 |
| |
| 作者单位： | 1. 北京航空材料研究院,北京,100095
2. 西北工业大学,西安,710072 |
| |
| 摘 要： | 采用XMH-160型线性摩擦焊机焊接TC4钛合金板材,观察了焊接接头形貌及焊缝组织,测试了焊接接头的力学性能.结果表明,TC4钛合金适于采用线性摩擦焊接,焊接接头的室温拉伸性能、冲击韧性和高周疲劳性能不低于母材.其线性摩擦焊接头大致可以分为焊缝区和塑性变形区两个区域,焊缝区域原始组织被破碎,晶粒细小；塑性变形区域原始片层组织被压扁拉长,与焊接振动方向呈近平行的流线状.
|
| 关 键 词： | 钛合金 线性摩擦焊 组织 力学性能 |
Study on Microstructure and Properties of Line Friction Welded Joint of TC4 Alloy |
| |
| Authors: | Zhang Xuejun Ma Tiejun Li Neng Liu Wenhui |
| |
| Affiliation: | 1(1.Beijing Institute of Aeronautic Materials,Beijing 100095,China)(2.Northwestern Polytechnical University,Xi’an 710072,China) |
| |
| Abstract: | TC4 alloy was welded by XHM-160 line friction welding machine.The morphology of welded joint and microstructure of welded seam was studied.The results show that the tensile properties,impact toughness and high circle fatigue properties of welded joint is no less than the base metal,which illustrates that the line friction welding process is suitable for the TC4 alloy.The line friction welded joint can be divided into the welded seam zone and the plastic deformation zone.The original structure of the welded seam zone is crushed and the grains are refined.The initial lamellar microstructure in the plastic deformation zone is flattened,elongated,and the flow linear nearly parallel to the welded vibration direction. |
| |
| Keywords: | titanium alloy linear friction welding process microstructure mechanical properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
