首页 | 本学科首页   官方微博 | 高级检索  
     

不同热处理工艺对工业TC4合金板材组织和性能的影响
引用本文:王蕊宁,杨建朝,吕利强,高文柱,奚正平,谢英杰,高维娜.不同热处理工艺对工业TC4合金板材组织和性能的影响[J].钛工业进展,2010,27(6):27-29.
作者姓名:王蕊宁  杨建朝  吕利强  高文柱  奚正平  谢英杰  高维娜
作者单位:[1]西部金属材料股份有限公司板带项目部,陕西西安710065 [2]西北有色金属研究院,陕西西安710016
基金项目:国家科技支撑计划项目,陕西省重大科技创新专项资金项目,国家973项目
摘    要:研究了两相区普通热处理和β相区固溶+两相区固溶双重热处理对工业TC4合金板材组织和性能的影响。结果表明:两相区普通退火处理(分别在700,750,800℃保温1 h,空冷)可以得到较好的综合性能,随温度升高,晶粒略有长大,强度、塑性逐渐降低;β相区固溶+两相区固溶双重热处理(1 050℃×30 min,AC+720℃×2 h,AC)得到网篮组织,强度、塑性明显降低。

关 键 词:TC4板材  显微组织  力学性能

Influence of Heat-Treatment on Microstructure and Mechanical Properties of TCA Plate
Authors:Wang Ruining  Yang Jianchao  Lü Liqiang  Gao Wenzhu  Xi Zhengping  Xie Yingjie  Gao Weina
Affiliation:1. Western Metal Material Co., Ltd., Xi'an 710065, China) (2. Northwest Institute for Nonferrous Metal Research, Xi'an 710016, China)
Abstract:The influence of different heat-treatment on microstructure and mechanical properties of TCA plate was studied. Resuhs show that the good comprehensive properties are obtained in TC4 plate heat treated in (α +β) region, and the strength and plasticity are decreased with temperature increase; basket structure is obtained in TCA plate double heat treated in β region and (α +β) region, and simultaneously, the strength and plasticity are decreased obviously.
Keywords:TCA plate  microstructure  mechanical properties
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号