分模方式对TC18钛合金模锻件组织及力学性能的影响

针对实际生产中TC18钛合金模锻件存在的成形难和组织、性能不稳定的问题,对锻件分模面位置和结构进行了调整,并进行实验验证。结果表明,采用顶部分模方式可以大大改善金属的流动性,减少锻造火次,提高生产效率,同时锻件组织较采用中间分模得到的更加均匀,强度和断裂韧性得到了提高,塑性也保持了较高的水平,具有良好的综合性能。

Impact of Parting Surface Position on Microstructure and Mechanical Properties of TC18 Titanium Alloy Forgings

The problems of forming and mechanical property instability for TC 18 titanium alloy forgings have been analyzed in this paper .By adjusting the parting surface position and its structure , and then after testing and verifying , it is found that parting from roof surface can improve the metal flowing state , decrease the forging heats and also increase production efficiency .Moreover, the forging with roof parting surface is found to have more uniform micro-structure with better strength and fracture toughness .The ductility of forging with roof parting surface has remained at a high level , the comprehensive properties is also good .