首页 | 本学科首页   官方微博 | 高级检索  
     

热处理对TC21合金大规格棒材组织和性能的影响
引用本文:雷文光,毛小南,侯智敏,卢亚峰,曲恒磊,周义刚,奚正平.热处理对TC21合金大规格棒材组织和性能的影响[J].钛工业进展,2010,27(1):28-31.
作者姓名:雷文光  毛小南  侯智敏  卢亚峰  曲恒磊  周义刚  奚正平
作者单位:1. 西北有色金属研究院,陕西,西安,710016
2. 西部金属材料有限公司,陕西,西安,710065
3. 西北工业大学,陕西,西安,710072
基金项目:国家科技支撑计划项目,973计划项目 
摘    要:研究了不同热处理制度对TC21合金380 mm大规格棒材显微组织和力学性能的影响。结果表明,固溶温度影响初生α相含量以及形貌尺寸,固溶时间对显微组织没有显著的影响;冷却速度影响次生α相含量及尺寸,且对合金强度和塑性产生较大的影响。在890℃×2 h+FC固溶处理后进行610℃×4 h+AC时效处理,可使合金的强度和塑性得到良好的匹配。

关 键 词:TC21合金  热处理  显微组织  力学性能

Effect of Heat Treatment on Microstructures and Mechanical Properties of TC21 Alloy Large Bar
Authors:Lei Wenguang  Mao Xiaonan  Hou Zhiming  Lu Yafeng  Qu Henglei  Zhou Yigang  Xi Zhengping
Affiliation:Lei Wenguang Mao Xiaonan Hou Zhiming Lu Yafeng Qu Henglei Zhou Yigang Xi Zhengping ( 1. Northwest Institute for Nonferrous Metal Research, Xi'an 710016, China;2. Western Metal Materials Co., Ltd., Xi'an 710065, China;3. Northwestern Polytechnical University, Xi'an 710072, China)
Abstract:The effects of various heat treatments on the microstructures and mechanical properties of TC21 titanium alloy large bar were investigated. The results show that the solution temperature affects the content and dimension of primary a phase, but has no obvious effects on the microstruetures. In addition, the cooling rate has influence on the grain size and the content of secondary α phase, and also has significant impact on the strength and plasticity of the alloy. It will enable good matching of strength and plasticity of the TC21 titanium alloy by choosing a suitable cooling rate.
Keywords:TC21 titanium alloy  heat treatment  microstructure  mechanical properties  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号