| 3500中厚板轧机轧制力数学模型的研究 |
| |
| 引用本文： | 陈振业,梁栋,陈子刚,张宏昌.3500中厚板轧机轧制力数学模型的研究[J].南方金属,2011(2). |
| |
| 作者姓名： | 陈振业 梁栋 陈子刚 张宏昌 |
| |
| 作者单位： | 1. 河北钢铁集团邯郸钢铁集团有限公司,河北,邯郸,056015
2. 湖北汽车工业学院,科技学院,湖北,十堰,441000 |
| |
| 摘 要： | 以邯钢3500中厚板轧机为研究对象,根据中厚板轧制工艺的特点,对影响轧制力的因素进行了分析.建立了计算中厚板轧制压力的数学模型,并根据实测数据分别进行计算,将所得的轧制压力与实测压力进行了比较,计算值与实测值之间的误差在9%以内.这个轧制力数学模型可用于邯钢3500中厚板轧制压力的预报,指导实际生产.
|
| 关 键 词： | 中厚板 变形抗力 轧制压力 数学模型 |
Modeling of the rolling pressure for a medium plate mill |
| |
| CHEN Zhen-ye,LIANG Dong,CHEN Zi-gang,ZHANG Hong-chang.Modeling of the rolling pressure for a medium plate mill[J].Southern Metals,2011(2). |
| |
| Authors: | CHEN Zhen-ye LIANG Dong CHEN Zi-gang ZHANG Hong-chang |
| |
| Affiliation: | CHEN Zhen-ye1,LIANG Dong2,CHEN Zi-gang1,ZHang Hong-chang1(1.Handan Iron and Steel Group Co.Ltd.,Handan 056015,Hebei,2.School of Science and Technology,Hubei University of Automotive Technology,Shiyan 441000,Hubei) |
| |
| Abstract: | The factors affecting the rolling pressure of the 3500 medium plate mills at Handan Iron and Steel were investigated by modeling.A mathematical model for calculating the rolling pressure was established,and a comparison of the calculated values with the measured ones for the rolling pressure showed that the discrepancy between them was less than 9%.The model can be used to predict the rolling pressure of the 3500 plate mills at Handan Iron and Steel. |
| |
| Keywords: | medium plate deformation resistance rolling pressure mathematical mode |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
