首页 | 本学科首页   官方微博 | 高级检索  
     

立式板坯连铸机结晶器内液面波动的物理模拟
引用本文:赵志刚,胡坤太,陈远清,施哲,仇圣桃. 立式板坯连铸机结晶器内液面波动的物理模拟[J]. 特殊钢, 2011, 32(3): 12-14
作者姓名:赵志刚  胡坤太  陈远清  施哲  仇圣桃
作者单位:1昆明理工大学冶金与能源工程学院,昆明650093;2钢铁研究总院连铸技术国家工程研究中心,先进钢铁流程及材料国家重点实验室,北京100081
基金项目:科技部科研院所技术开发研究专项资金项目(NC-STE-2006-JK-ZX-030)
摘    要:为优化200 mm×1 300 mm立式板坯连铸结晶器浸入式水口,采用1:1水模型模拟研究水口结构参数(侧孔断面-40 mm×80 mm,40 mm×40 mm和侧孔角度+15°和-15°)以及工艺参数(浸入深度-100~130 mm,拉速0.45~0.65 m/min)对液面波动的影响。结果表明:水口结构参数对液面波动的影响较明显;侧孔断面40 mm×40 mm,侧孔角度+15°的2#水口的使用性能相对较好;浸入深度对液面波动量的影响不大;拉速对液面波动的影响与水口结构有关,对拉速变化的敏感程度由大到小的次序是2#水口(40 mm×40 mm,+15°),4#水口(40 mm×40mm,-15°),3#水口(40 mm×80 mm,-15°),1#水口(40 mm×80 mm,+15°)。

关 键 词:立式连铸机  结晶器  液面波动  浸人式水口  
收稿时间:2011-01-05

Physical Modeling of Fluctuation of Liquid Level in Mold of Vertical Slab Concaster
Zhao Zhigang,Hu Kuntai,Chen Yuanqing,Shi Zhe,Qiu Shengtao. Physical Modeling of Fluctuation of Liquid Level in Mold of Vertical Slab Concaster[J]. Special Steel, 2011, 32(3): 12-14
Authors:Zhao Zhigang  Hu Kuntai  Chen Yuanqing  Shi Zhe  Qiu Shengtao
Affiliation:1 College of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093;2 The State Key Laboratory of Advanced Processes and Products for Iron and Steel, National Engineering ResearchCenter of Continuous Casting Technology, Central Iron and Steel Research Institute, Beijing 100081
Abstract:In order to optimize the submerged entry nozzle (SEN) for 200 mm x 1 300 mm vertical slab casting mold, the effect of parameters of nozzle structure (cross section dimension of side port- 40 mm x40 mm and 40 mm x80 mm, and angle of port- + 15° and - 15°) and process parameters ( submerged depth 100 ~ 130 mm and casting speed 0. 45 ~ 0. 65 m/min) on fluctuation of liquid level has been simulated and studied by 1 : 1 water model. Results show that the effect of nozzle structure parameters on fluctuation of liquid level is more obvious and the structure of 2# nozzle with side port dimension 40 mm x40 mm and angle of port +15° has better service performance; the effect of submerged depth on fluctuation of liquid level isn' t appreciable ; and the effect of casting speed on fluctuation of liquid level relates to nozzle structure, and the descending order of sensitivity of nozzle structure to casting speed is nozzle 2#(40 mm x40 mm, +15°), nozzle 4#(40 mm x40 mm, - 15°) , nozzle 3# (40 mm x 80 mm, - 15°) and nozzle 1#(40 mm x 80 mm, + 15°).
Keywords:Vertical Concaster  Mold  Fluctuation of Liquid Level  Submerged Entry Nozzle  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《特殊钢》浏览原始摘要信息
点击此处可从《特殊钢》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号