| Ti-IF钢动态再结晶模型 |
| |
| 引用本文： | 徐光,徐楚韶.Ti-IF钢动态再结晶模型[J].特殊钢,2006,27(6):13-14. |
| |
| 作者姓名： | 徐光 徐楚韶 |
| |
| 作者单位： | 重庆大学材料科学与工程学院，重庆400044 |
| |
| 摘 要： | 通过Thermecmastor-Z热模拟实验机对Ti-IF(无间隙原子)钢(%:0.009C、0.017Si、0.13Mn、0.012P、0.013S、0.05Ti、0.025Als)在750℃、850℃和变形速率0.1,1,20s-1下进行单道次压缩变形实验。得出Ti-IF钢加工硬化率-应变曲线、动态再结晶状态图和动态再结晶体积分数方程。实验结果表明,对于无明显峰值应变的应力-应变曲线,采用加工硬化率方法确定峰值应变和稳态应变是一种有效的方法。
|
| 关 键 词： | Ti-IF钢 加工硬化率 峰值应变 动态再结晶 |
| 收稿时间： | 04 27 2006 12:00AM |
| 修稿时间： | 2006-04-27 |
Modelling of Dynamic Recrystallization for a Ti-IF Steel |
| |
| Xu Guang,Xu Chushao.Modelling of Dynamic Recrystallization for a Ti-IF Steel[J].Special Steel,2006,27(6):13-14. |
| |
| Authors: | Xu Guang Xu Chushao |
| |
| Affiliation: | College of Material Science and Engineering, Chongqing University, Chongqing 400044 |
| |
| Abstract: | Single pass reduction deformation experiment of a Ti-IF （interstitial atom free） steel - 0. 009C, 0. 017Si, 0. 13Mn, 0. 012P, 0. 013S, 0. 05Ti, 0. 025Als with deformation rate 0. 1, 1 and 20 s-1 at 750 °C and 850 °C has been carried out by Thermecmastor-Z thermal simulation machine. The curves of work hardening rate - strain for the Ti-IF steel, the dynamic recrystallization diagram and the volume fraction equation of dynamic recrystallization were obtained. Test results show that for the stress-strain curves with no obvious peak strain, it is a available to use work hardening rate method to determine peak strain and stable strain. |
| |
| Keywords: | Ti-IF Steel Work Hardening Rate Peak Strain Dynamic Recrystallization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
