| 板坯连铸结晶器钢液流场的数值模拟和优化 |
| |
| 引用本文： | 贾凌锋,乐可襄.板坯连铸结晶器钢液流场的数值模拟和优化[J].特殊钢,2007,28(4):10-12. |
| |
| 作者姓名： | 贾凌锋 乐可襄 |
| |
| 作者单位： | 安徽工业大学冶金与资源学院, 马鞍山243002 |
| |
| 摘 要： | 用CFD三维计算软件,采用k、ε双方程模型在给定的数值计算条件下,对900 mm高的板坯连铸结晶器内钢液流场进行了数值模拟,研究结晶器工艺参数对结晶器液面湍动能和窄边冲击压力的影响。结果表明:对于断面尺寸为220 mm×900 mm的板坯结晶器,水口插入深度为180 mm,水口倾角为向下15°,拉坯速度为1.6～1.8 m/min时,结晶器内钢液具有较好的流动方式。
|
| 关 键 词： | 板坯连铸 结晶器 湍动能 冲击压力 数值模拟 |
| 收稿时间： | 2007-01-22 |
| 修稿时间： | 2007-01-22 |
Numerical Simulation of Flow Field in Mould for Slab Continuous Casting and Optimal Operation |
| |
| Jia Lingfeng,Yue Kexiang.Numerical Simulation of Flow Field in Mould for Slab Continuous Casting and Optimal Operation[J].Special Steel,2007,28(4):10-12. |
| |
| Authors: | Jia Lingfeng Yue Kexiang |
| |
| Affiliation: | Metallurgy and Resources School, Anhui University of Technology, Ma'anshan 243002 |
| |
| Abstract: | Fluid field of molten steel in mould with 900 mm height for slab continuous casting has been simulated using k-e double equation model under numerical calculation conditions by a 3 dimensional mathematical software CFD to study effect of process parameters of mould on distribution turbulent kinetic energy at liquid level in mould and impact pressure at narrow side of mould. Results showed that for cross section 220 mm x 900 mm slab mould, the molten steel in mould had better flowage condition as immersion depth of nozzle was 180 mm with exit angle 15° and casting speed 1.6 ~ 1. 8 m/min. |
| |
| Keywords: | Slab Continuous Casting Mould Turbulence Kinetic Energy Impact Pressure Numerical Simulation |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
