首页 | 本学科首页   官方微博 | 高级检索  
     

高碳帘线钢72A连续冷却转变(CCT)的特性
引用本文:王超,赵刚,蔡国庆,程先舟,欧阳标,董素梅.高碳帘线钢72A连续冷却转变(CCT)的特性[J].特殊钢,2008,29(5):13-15.
作者姓名:王超  赵刚  蔡国庆  程先舟  欧阳标  董素梅
作者单位:1. 武汉科技大学材料与冶金学院,武汉 430081; 2. 武汉钢铁集团公司,武汉 430083;
摘    要:采用热膨胀法,通过THERMECMASTOR-Z热模拟实验机测试了高碳帘线钢72A(%:0.72C、0.53Mn、0.22Si)的连续冷却转变(CCT)曲线,并分析了开始冷却温度(840~930℃)和冷却速度(0.8~22℃/s)对钢组织的影响。结果表明,相同开始冷却温度条件下,冷却速度越快,相变时间越短;相同冷速条件下,随着开始冷却温度的升高,到达相变开始转变温度的时间和到达转变终了温度的时间会延后;提高开始冷却温度,珠光体的百分含量增加,珠光体片层间距减少,有利于提高线材力学性能。

关 键 词:高碳帘线钢  CCT  组织  
收稿时间:2008-03-31

Features of Continuous Cooling Transformation(CCT) of High Carbon Steel 72A for Tyre Core Wire
Wang Chao,Zhao Gang,Cai Guoqing,Cheng Xianzhou,Ouyang Biao,Dong Sumei.Features of Continuous Cooling Transformation(CCT) of High Carbon Steel 72A for Tyre Core Wire[J].Special Steel,2008,29(5):13-15.
Authors:Wang Chao  Zhao Gang  Cai Guoqing  Cheng Xianzhou  Ouyang Biao  Dong Sumei
Affiliation:1. School of Materials and Metallurgy,Wuhan University of Science and Technology,Wuhan 430081; 2. Wuhan Iron and Steel Co,Wuhan 430083;
Abstract:The continuous cooling transformation (CCT) curves of high carbon steel 72A (0.72C,0.53Mn,0.22Si) for tyre core wire has been measured by THERMECMASTOR-Z thermal simulation machine using thermal dilatation method,and the effect of start cooling temperature(840~930℃)and cooling rate(0.8~22 ℃/s)on structure of steel has been analyzed. Results showed that at same start cooling temperature,with increasing cooling rate,the phase transformation period decreased;at same cooling rate,with increasing start cooling temperature,the time reaching the start and end of phase transformation increased; Increasing start cooling temperature was available to increase pearlite percentage content and decrease interlamellar spacing and enhance mechanical properties of wire.
Keywords:CCT
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《特殊钢》浏览原始摘要信息
点击此处可从《特殊钢》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号