Behavior of Bridge Asphalt Plug Joints under Thermal and Traffic Loads

An asphalt plug joint (APJ) is a type of expansion joint providing quick, easy, and cheap installation along with good surface flatness. However, APJs are known to suffer from premature failure, and their behavior, especially under thermal movement, has not yet been fully established. In this paper, the behavior of a typical APJ subjected to thermal and traffic loads is examined through a series of finite element analyzes employing a temperature-dependent viscoplastic material model. The material parameters are calibrated by using previously published test data, and the model is validated by comparing simulated responses to APJ test data. The developed models are then used to investigate stress and strain distributions, vulnerable locations to cracking failure, and local demands at those locations when a prototype APJ is subjected to various loading and temperature conditions. Sensitivity studies are also conducted to quantify the effect of debonding the bottom of the APJ and loading rate. The model results shed light about APJ response under traffic and thermal loading and provide new, fundamental information that can be used to improve the durability of APJs. For example, the simulation results suggest that intentionally debonding the interface between the gap plate and the APJ is a practical and low cost solution to mitigate the risk of premature APJ failure.