首页 | 本学科首页   官方微博 | 高级检索  
     

SS400连铸坯总氧含量的分布规律
引用本文:李德军,于赋志,许孟春,方恩俊,刘清海.SS400连铸坯总氧含量的分布规律[J].鞍钢技术,2016(1):16-19.
作者姓名:李德军  于赋志  许孟春  方恩俊  刘清海
作者单位:鞍钢集团钢铁研究院,辽宁鞍山,114009;鞍钢股份有限公司鲅鱼圈钢铁分公司,辽宁营口,115007
摘    要:对SS400连铸坯不同部位钢中总氧含量分布进行了分析,结果表明,SS400连铸坯正常坯与过渡坯的总氧含量相对较低,平均值小于0.001 5%,能够满足洁净钢要求;头坯坯头及头坯坯尾总氧含量均值分别为0.003 9%和0.002 5%,不利于洁净钢生产,对此进行了原因分析,并提出了相应措施,实施后达到了生产要求。

关 键 词:连铸坯  夹杂物  总氧含量

Distribution Regularity of Total Oxygen Content in SS400 Continuous Casting Slab
Li Dejun,Yu Fuzhi,Xu Mengchun,Fang Enjun,Liu Qinghai.Distribution Regularity of Total Oxygen Content in SS400 Continuous Casting Slab[J].Aisc Techniques,2016(1):16-19.
Authors:Li Dejun  Yu Fuzhi  Xu Mengchun  Fang Enjun  Liu Qinghai
Abstract:The distribution condition of the total oxygen content in different locations of th e SS400 continuous casting slab was analyzed. The analytical results show that the total oxygen con-tent in normal slabs and intermixing slabs is relatively lower with the average content less than 0.001 5%, which can meet the requirements for smelting the clean steel. The average total oxygen content at both the head and the tail of the first slab is 0.003 9% and 0.002 5% respectively, which is bad for smelting the clean steel. For this the causes leading to relative high content of to-tal oxygen were analyzed and then the corresponding measures are proposed. After these measures are taken the requirements for smelting the clean steel are met.
Keywords:continuous casting slab  inclusion  total oxygen content
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号