|
|||||
|
|
| 板带粗轧不均匀变形行为的数值解析 | |
| 引用本文： | 郭太雄,龙晋明,郑之旺.板带粗轧不均匀变形行为的数值解析[J].钢铁钒钛,2006,27(3):14-20. |
| 作者姓名： | 郭太雄 龙晋明 郑之旺 |
| 作者单位： | 1. 昆明理工大学材料与冶金工程学院,云南,昆明,650093;攀枝花钢铁研究院,四川,攀枝花,617000 2. 昆明理工大学材料与冶金工程学院,云南,昆明,650093 3. 攀枝花钢铁研究院,四川,攀枝花,617000 |
| 摘 要： | 针对攀钢热轧机组采用立辊调宽的特点,利用MSC.Marc有限元分析软件对板坯在立辊及水平辊轧制过程中的不均匀变形行为进行了离线模拟解析,分析了轧制工艺条件对轧后中间坯头尾形状尺寸及宽度的影响规律.模拟结果与实测值能较好地吻合.这对热轧寻求降低切损、提高成材率的措施具有一定的指导意义. |
| 关 键 词： | 热轧带钢 有限元 数值模拟 立辊调宽 变形规律 |
| 文章编号： | 1004-7638（2006）02-0014-07 |
| 收稿时间： | 2005-12-09 |
| 修稿时间： | 2005年12月9日 |
Numerical Analysis on Uneven Deformation Behavior of Hot Strip in Rough Rolling |
|
| Guo Taixiong,Long Jinming,Zheng Zhiwang.Numerical Analysis on Uneven Deformation Behavior of Hot Strip in Rough Rolling[J].Iron Steel Vanadium Titanium,2006,27(3):14-20. | |
| Authors: | Guo Taixiong Long Jinming Zheng Zhiwang |
| Affiliation: | 1. Kunming University of Science and Technology, Kunming 650093, Yunnan, China ; 2. Panzhihua Iron and Steel Research Institute, Panzhihua 617000, Siehuan, China |
| Abstract: | According to the characteristic of adjusting width by erect roll at PZH Steel, the uneven deformation rule of slab during erect and horizontal rolling was analyzed by finite element simulation on base of MSC. Marc software. The effect of rolling process conditions on the width and size of head and tail of interim slab were also analyzed by numerical simulation. The results of simulation are accord with practical values. These results are helpful to find out some measures for hot rolling plant to decrease chip - off and increase incoming ratio. |
| Keywords: | hot rolling strip finite element numerical simulation adjusting width by erect roll metal deforming rule |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |