首页 | 本学科首页   官方微博 | 高级检索  
     

氧化锆/氧化铝复合纤维的制备
引用本文:谭宏斌.氧化锆/氧化铝复合纤维的制备[J].有色金属(冶炼部分),2012(3):47-49.
作者姓名:谭宏斌
作者单位:陕西理工学院材料学院,陕西汉中,723003
基金项目:陕西省自然科学基金资助项目(2010K10-21)
摘    要:以硝酸铝、氯氧化锆和酒石酸为原料,聚乙烯吡咯烷酮(PVP)为纺丝助剂,用溶胶—凝胶法制备了氧化锆/氧化铝复合纤维。结果表明,凝胶纤维的长度随PVP掺量增加而增加,凝胶纤维最大长度为60cm;凝胶纤维在1 200℃烧结后,纤维的物相为α-Al2O3和四方ZrO1.88,纤维的直径为4μm,纤维表面光滑,直径均匀。

关 键 词:氧化锆/氧化铝  长纤维  制备  形貌
收稿时间:2011/7/18 0:00:00

Preparation of Zirconia/Alumina Composite Fibers
TAN Hong-bin.Preparation of Zirconia/Alumina Composite Fibers[J].Nonferrous Metals(Extractive Metallurgy),2012(3):47-49.
Authors:TAN Hong-bin
Affiliation:School of Materials Science and Engineering, Shaanxi University of Technology, Hanzhong 723003, Shaanxi, China
Abstract:Zirconia/alumina composite long fibers were prepared by sol-gel process with aluminium nitrate,zirconium oxychloride,and tartaric acid as raw materials,and polyvinylpyrrolidone(PVP) as spinning additive.The results indicate that the length of gel fibers increases with the increase of PVP addition amount.The maximum length of fiber is about 60 cm.The composite fibers,with α-Al2O3,t-ZrO1.88 in phase,and 4 μm in diameter,can be obtained by sintering gel fibers at 1 200 ℃.The fibers have smooth surface and uniform diameters.
Keywords:zirconia/alumina  long fibers  preparation  morphology
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《有色金属(冶炼部分)》浏览原始摘要信息
点击此处可从《有色金属(冶炼部分)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号