首页 | 本学科首页   官方微博 | 高级检索  
     

3D打印铜电解MWNT/ABS导电复合材料阴极与性能研究
引用本文:诸葛祥群,向利,李前进,罗志虹,罗鲲.3D打印铜电解MWNT/ABS导电复合材料阴极与性能研究[J].有色金属(冶炼部分),2017(10):23-27.
作者姓名:诸葛祥群  向利  李前进  罗志虹  罗鲲
作者单位:桂林理工大学材料科学与工程学院,桂林理工大学材料科学与工程学院,桂林理工大学材料科学与工程学院,广西有色金属及特色材料加工省部共建国家重点实验室培育基地,桂林理工大学材料科学与工程学院,广西有色金属及特色材料加工省部共建国家重点实验室培育基地,桂林理工大学材料科学与工程学院
基金项目:广西科学研究与技术开发计划项目(桂科攻14122007-15)
摘    要:采用自制MWNT/ABS导电纳米复合材料耗材,借助3D打印方法制备了铜电解精炼阴极板及配套电解槽,开展替代钛种板的研究。采用硫酸体系电解液进行电解精炼试验,得到致密均匀的面心立方晶系电解铜,沉积物剥离方便,且阴极板及电解槽结构具有可设计性。循环伏安分析表明,Cu2+在导电复合材料上可正常形核与生长,添加微量的明胶以及硫脲后电解铜的表面更加均匀平整,晶粒尺寸变小。

关 键 词:3D打印  导电复合材料    电解精炼  阴极
收稿时间:2017/5/7 0:00:00
修稿时间:2017/5/11 0:00:00

3D Printing Fabrication and Performance of Conductive MWNT/ABS Composite Cathode for Copper Electrorefining
ZHUGE Xiang-qun,XIANG Li,LI Qian-jin,LUO Zhi-hong and LUO Kun.3D Printing Fabrication and Performance of Conductive MWNT/ABS Composite Cathode for Copper Electrorefining[J].Nonferrous Metals(Extractive Metallurgy),2017(10):23-27.
Authors:ZHUGE Xiang-qun  XIANG Li  LI Qian-jin  LUO Zhi-hong and LUO Kun
Affiliation:Guangxi Ministry-Province Jointly-Constructed Cultivation Base for State Key Laboratory of Processing for Non-ferrous Metal and Featured Materials,,,,
Abstract:Conductive MWNT/ABS composite cathode and matching electrolytic cell were fabricated by 3D printing to substitute normal titanium substrate cathode. Obtained in copper sulfate electrolyte, compact and uniform copper layers of fcc crystal system could be easily peeled off from composite cathode. Structures of cathode and cell are designable. Cyclic voltammetric investigation suggests that nucleation and growth of copper are similar to those on metal cathodes, and additives of gelatin and thiourea can apparently reduce crystal size and make copper deposit uniform and compact.
Keywords:3D printing  conductive composite  copper  electrorefining  cathode
本文献已被 CNKI 等数据库收录!
点击此处可从《有色金属(冶炼部分)》浏览原始摘要信息
点击此处可从《有色金属(冶炼部分)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号