首页 | 本学科首页   官方微博 | 高级检索  
     

碳纤维表面沉积碳化钨膜研究
引用本文:李一,李金普,李发长,柳学全,李楠,周武平,贾成厂.碳纤维表面沉积碳化钨膜研究[J].粉末冶金技术,2012,30(3):214-218.
作者姓名:李一  李金普  李发长  柳学全  李楠  周武平  贾成厂
作者单位:1. 北京科技大学材料科学与工程学院,北京100083;中国钢研科技集团有限公司,北京100081
2. 北京科技大学材料科学与工程学院,北京,100083
3. 中国钢研科技集团有限公司,北京,100081
基金项目:国家高技术研究发展计划资助项目
摘    要:通过W(CO)6化学气相沉积(MOCVD)工艺,在碳纤维表面沉积得到了碳化钨膜材料,研究了碳纤维表面沉积碳化钨膜的工艺条件.结果表明:在400℃沉积温度下沉积时间15min,一定浓度的W(CO)6可解离沉积在碳纤维表面形成致密碳化钨膜;膜层厚度0.4μm,物相为WC1-x相,与碳纤维基体结合强度高.DTA分析表明,复合...

关 键 词:碳纤维  金属有机化学气相沉积(MOCVD)  碳化钨  六羰基钨

Study of deposition of tungsten carbide film onto carbon fiber
Li Yi , Li Jinpu , Li Fachang , Liu Xuequan , Li Nan , Zhou Wuping , Jia Chengchang.Study of deposition of tungsten carbide film onto carbon fiber[J].Powder Metallurgy Technology,2012,30(3):214-218.
Authors:Li Yi  Li Jinpu  Li Fachang  Liu Xuequan  Li Nan  Zhou Wuping  Jia Chengchang
Affiliation:1) 1)(School of Materials Science and Engineering,University of Science and Technology Beijing, Beijing 100083,China) 2)(China Central Iron & Steel Research Institute Group Limited,Beijing 100081,China)
Abstract:Carbon fibers were coated with tungsten carbide film by metal organic chemical vapor deposition method with a precursor of hexacarbonyl tungsten,and the processing parameters of depositing tungsten carbide onto carbon fiber were studied.The results show that the surface of carbon fibers is covered with a dense and regular tungsten carbide film which is deposited at temperature of 400℃with holding time of 15min.The thickness of as-deposited film is about 0.4μm,and the phase of film is WC1-x.There is good adhesion between the coated film and carbon fiber.The DTA analysis results indicate that the thermal anti-oxidization properties of carbon fiber composites are improved significantly.
Keywords:carbon fiber  metal organic chemical vapor deposition(MOCVD)  tungsten carbide  hexacarbonyl tungsten
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号