| 电泳沉积法制备Fe2O3膜及其烧结致密化 |
| |
| 引用本文： | 常通,李志友,马莉,周科朝. 电泳沉积法制备Fe2O3膜及其烧结致密化[J]. 粉末冶金材料科学与工程, 2011, 16(5): 760-767 |
| |
| 作者姓名： | 常通 李志友 马莉 周科朝 |
| |
| 作者单位： | 中南大学粉末冶金国家重点实验室,长沙,410083 |
| |
| 基金项目： | 国家重点基础研究发展规划(973计划)资助项目(2005CB623703); 国家高技术研究发展计划(863计划)资助项目(2008AA030501); 国家自然科学基金创新团队项目(50721003); 湖南省博士研究生创新基金资助(CX2009B032); 中南大学优秀博士论文扶持基金资助项目(2009ybfz02),中南大学贵重仪器开放共享基金资助(ZKJ2009024) |
| |
| 摘 要： | 采用电泳沉积技术在Ni基体上制备Fe2O3膜,研究pH值对Fe2O3悬浮液稳定性的影响;沉积时间对电泳沉积速率,沉积层厚度及致密度的影响;高温处理对Fe2O3膜的致密度及膜与基体之间结合性能的影响。利用扫描电镜(SEM)、纳米粒度及zeta电位分析仪对电泳沉积进行表征。实验结果表明:当pH值为3时,悬浮液的zeta电位高达67 mV以上,此时悬浮液分散均匀。当电场强度为30 V/cm,沉积时间为120 s时,可以制备出均匀、无裂纹、相对密度为56%的Fe2O3膜。经1 000℃与1 100℃热处理4 h后,Fe2O3膜的致密度有所提高,与基体之间的结合性能改善。
|
| 关 键 词： | 电泳沉积 Fe2O3膜 zeta电位 烧结 |
Preparation of Fe_2O_3 films by electrophoretic deposition and its sintering densification |
| |
| CHANG Tong,LI Zhi-you,MA Li,ZHOU Ke-chao. Preparation of Fe_2O_3 films by electrophoretic deposition and its sintering densification[J]. materials science and engineering of powder metallurgy, 2011, 16(5): 760-767 |
| |
| Authors: | CHANG Tong LI Zhi-you MA Li ZHOU Ke-chao |
| |
| Affiliation: | CHANG Tong,LI Zhi-you,MA Li,ZHOU Ke-chao (State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China) |
| |
| Abstract: | Ferric oxide(Fe2O3) films were prepared on the Ni substrate by electrophoretic deposition(EPD).The effects of pH value on the stability of Fe2O3 suspension,the deposition time on the deposition rate,sediment thickness and density,and the heat treatments on the density of Fe2O3 films and the bonding strength between the film and the substrate were studied.Scanning electron microscopy(SEM),nanoparticle size analyzer and zeta potential analyzer were used to characterize the films.The results show that,when the... |
| |
| Keywords: | Electrophoretic deposition Fe2O3 film zeta potential sintering |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
