| M2高速钢的高温力学性能 |
| |
| 引用本文： | 迟宏宵,徐辉霞,方峰,蒋建清,朱旺龙,马党参.M2高速钢的高温力学性能[J].中国冶金,2016,26(1):31-34. |
| |
| 作者姓名： | 迟宏宵 徐辉霞 方峰 蒋建清 朱旺龙 马党参 |
| |
| 作者单位： | 1. 东南大学材料科学与工程学院， 江苏 南京 211189 2. 江苏省天工工模具钢工程技术研究中心， 江苏 镇江 212312 3. 钢铁研究总院特殊钢研究所， 北京 100081 |
| |
| 摘 要： | 在Gleeble- 3800热模拟机上进行了高速工具钢W6Mo5Cr4V2（M2）钢热模拟试验，测试了从650℃到1250℃温度M2钢的高温力学性能，得到了抗拉强度曲线和热塑性曲线，观察了不同温度下试样的金相组织和断口形貌。试验结果表明：M2高速钢的零塑性温度为1220℃，零强度温度为1250℃。良好的塑性温度区为950~1150℃，脆性区主要为1175℃至熔点，在850~950℃存在一个较弱的脆性区。在800℃附近，还存在一个良好的低温超塑性区。分析表明，M2高速钢的高温力学性能与基体组织的相变、碳化物的溶解和低熔点碳化物的熔化有很大关系。
|
| 关 键 词： | M2高速钢 高温力学性能 热塑性 热模拟试验 |
High temperature mechanical properties of M2 high speed steel |
| |
| CHI Hong- xiao,XU Hui- xia,FANG Feng,JIANG Jian- qing,ZHU Wang- long,MA Dang- shen.High temperature mechanical properties of M2 high speed steel[J].China Metallurgy,2016,26(1):31-34. |
| |
| Authors: | CHI Hong- xiao XU Hui- xia FANG Feng JIANG Jian- qing ZHU Wang- long MA Dang- shen |
| |
| Affiliation: | 1. School of Materials Science and Engineering, Southeast University, Nanjing 211189, Jiangsu, China 2. Jiangsu Tiangong Engineering Research Center of Tool and Die Steel, Zhenjiang 212312， Jiangsu, China 3. Institute for Special Steels, Central Iron and Steel Research Institute, Beijing 100081, China |
| |
| Abstract: | The high- temperature mechanical properties of the high speed steel W6Mo5Cr4V2 (M2) were tested on a Gleeble- 3800 thermal simulator with the temperature ranging from 650℃ to 1250℃. As a result, the strength and thermal plasticity curves were obtained. And the microstructure and fracture morphology of specimens were observed at different temperature. The test results showed that the zero plastic temperature (ZDT) and zero strength temperature (ZST) of tested steel were 1220℃ and 1250℃, respectively. The optimum plastic temperature ranged from 950℃ to 1150℃. The brittle temperature varied from 1175℃ to melting point, but there was a weak brittle zone with the temperature from 800℃ to 950℃. The high- temperature mechanical properties of M2 steel were mainly influenced by phase transformation, carbide dissolution and low- melting- point carbide melting. |
| |
| Keywords: | M2 high speed steel high-temperature mechanical properties thermo-plasticity thermal simulation testing |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国冶金》浏览原始摘要信息 |
|
点击此处可从《中国冶金》下载全文 |
|
