| 轧制下线温度对15CrNiMo硬度及析氢行为的影响 |
| |
| 引用本文： | 冀鸰,孔祥伟,秦志强. 轧制下线温度对15CrNiMo硬度及析氢行为的影响[J]. 中国冶金, 2019, 29(5): 44-47. DOI: 10.13228/j.boyuan.issn1006 9356.20180324 |
| |
| 作者姓名： | 冀鸰 孔祥伟 秦志强 |
| |
| 作者单位： | (江阴兴澄特种钢铁有限公司特钢研究院， 江苏 无锡 214400) |
| |
| 摘 要： | 为了优化牙轮钻头用15CrNiMo圆钢轧制工艺，降低圆钢氢含量及硬度，减少白点缺陷以及应力开裂的质量风险，对比了不同轧制下线温度对圆钢宏观硬度、显微硬度以及显微组织的影响，并采用升温脱氢分析方法(thermal desorption spectroscopy，简称TDS)对圆钢析氢曲线、氢含量等进行了对比分析。结果显示，升高轧制下线温度可以有效提高钢材铁素体组织比例，从而使钢材整体硬度降低，另外也有助于减少钢中的氢含量。
|
| 关 键 词： | 牙轮钻头 15CrNiMo TDS 析氢曲线 |
Effect of pit temperature after rolling on hardness and hydrogen diffusion behavior of 15CrNiMo |
| |
| JI Ling,KONG Xiang wei,QIN Zhi qiang. Effect of pit temperature after rolling on hardness and hydrogen diffusion behavior of 15CrNiMo[J]. China Metallurgy, 2019, 29(5): 44-47. DOI: 10.13228/j.boyuan.issn1006 9356.20180324 |
| |
| Authors: | JI Ling KONG Xiang wei QIN Zhi qiang |
| |
| Affiliation: | (Special Steel Institute, Jiangyin Xingcheng Special Steel Co., Ltd., Wuxi 214400, Jiangsu, China) |
| |
| Abstract: | In order to optimize the rolling process of 15CrNiMo round steel for cone bit, reduce the hydrogen content and hardness of round steel, and reduce the risk of flake defect and stress cracking, the effect of different pit temperature after rolling on the macro hardness, micro hardness and microstructure of 15CrNiMo round steel was compared and analyzed. The hydrogen desorption curves and hydrogen contents of round steel were analyzed by thermal desorption spectroscopy (TDS). The results showed that increasing the pit temperature could effectively increase the ferrite structure ratio of steel, thus reducing the overall hardness of steel, and also help to reduce the hydrogen content in steel. |
| |
| Keywords: | tricone rock bit 15CrNiMo TDS hydrogen desorption curve |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国冶金》浏览原始摘要信息 |
|
点击此处可从《中国冶金》下载全文 |
