| 等径弯曲通道变形对超低碳钢组织及性能的影响 |
| |
| 引用本文： | 王效岗,赵西成.等径弯曲通道变形对超低碳钢组织及性能的影响[J].钢铁研究学报,2007,19(5):54-0. |
| |
| 作者姓名： | 王效岗 赵西成 |
| |
| 作者单位： | 1. 太原科技大学材料学院,山西,太原,030024
2. 西安建筑科技大学冶金工程学院,陕西,西安,710055 |
| |
| 摘 要： | 研究了室温下C方式等径弯曲通道变形(ECAP)对超低碳钢组织及性能的影响。结果表明：第1道次ECAP变形后，组织细化效果最显著；随变形道次的增加，组织由取向差小的板条状亚晶演变成取向差大的等轴晶；第4道次ECAP变形后，晶粒平均尺寸约03 μm；变形道次继续增加，晶粒尺寸变化不显著，而晶粒取向差不断增大。这表明第4道次ECAP变形为超低碳钢细化极限；ECAP变形可大幅度提高超低碳钢的强度，并保持较高的塑性。
|
| 关 键 词： | 等径弯曲通道变形 超低碳钢 显微组织 力学性能 |
| 文章编号： | 1001-0963(2007)05-0054-04 |
| 收稿时间： | 1900-01-01; |
| 修稿时间： | 12 22 2006 12:00AM |
Microstructure and Mechanical Properties of Equal Channel Angular Pressed Ultra-Low-Carbon Steel |
| |
| WANG Xiao-gang,ZHAO Xi-cheng.Microstructure and Mechanical Properties of Equal Channel Angular Pressed Ultra-Low-Carbon Steel[J].Journal of Iron and Steel Research,2007,19(5):54-0. |
| |
| Authors: | WANG Xiao-gang ZHAO Xi-cheng |
| |
| Affiliation: | 1. College of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, Shanxi, China;2. School of Metallurgical Engineering, Xi??an University of Architecture and Technology, Xi??an 710055, Shanxi, China |
| |
| Abstract: | Ultra low carbon steel was successfully processed by equal channel angular pressing up to a total of 10 passes via route C at room temperature, and the submicron grained ferrite microstructures were obtained. Result shows that the equiaxed submicron grains form and the average grain size is 03 μm after fourth pass and the grain size does not decrease further after 4 pass of ECAP. The resultant steel exhibits high strength with a good elongation. |
| |
| Keywords: | ECAP ultra-low-carbon microst ructure mechanical properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《钢铁研究学报》浏览原始摘要信息 |
|
点击此处可从《钢铁研究学报》下载全文 |
