首页 | 本学科首页   官方微博 | 高级检索  
     

连铸结晶器振动过程连铸坯应力分布有限元分析
引用本文:王悦新,喻海良,刘相华.连铸结晶器振动过程连铸坯应力分布有限元分析[J].钢铁研究学报,2010,22(6):7-7.
作者姓名:王悦新  喻海良  刘相华
作者单位:东北大学轧制技术及连轧自动化国家重点实验室,辽宁,沈阳,110004
基金项目:国家973计划项目,教育部博士点基金项目
摘    要:对连铸结晶器振动过程进行了有限元模拟,获得了结晶器振动过程连铸坯表层应力分布,分析了结晶器锥度、结晶器与连铸坯间摩擦系数、拉速和连铸坯厚度对连铸坯表层应力分布的影响。振动过程结晶器末端附近区域连铸坯表层出现应力集中。随结晶器锥度减小和连铸坯宽度增加,连铸坯表层最大应力增加;拉速和连铸坯与结晶器间摩擦对连铸坯表层最大应力影响很小。研究结果对分析和认识连铸坯表面振痕的产生原因和结晶器磨损具有指导作用。

关 键 词:
收稿时间:2009-05-05;

Analysis of Vibration of Crystallizer on Stress Distribution of Slab During Continuous Casting Using FEM
WANG Yue-xin,YU Hai-liang,LIU Xiang-hua.Analysis of Vibration of Crystallizer on Stress Distribution of Slab During Continuous Casting Using FEM[J].Journal of Iron and Steel Research,2010,22(6):7-7.
Authors:WANG Yue-xin  YU Hai-liang  LIU Xiang-hua
Affiliation:WANG Yue-xin,YU Hai-liang,LIU Xiang-hua(State Key Laboratory of Rolling and Automation,Northeastern University,Shenyang 110004,Liaoning,China)
Abstract:The vibrating process of crystallizer during continuous casting was carried out by using the finite element method,and the stresses near slab surface at different stages were analyzed under various taper ratios of crystallizer,friction coefficients between crystallizer and slab,pulling speeds of slab,and slab widths.Results show that the stress concentration appears in the slab surface near the tail end of crystallizer.The maximum stress in slab surface increases with decreasing the taper ratio of crystalli...
Keywords:continuous casting  crystallizer  slab  stress distribution  crack  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《钢铁研究学报》浏览原始摘要信息
点击此处可从《钢铁研究学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号