| 半固态高碳工具钢的变形特性 |
| |
| 引用本文： | 李激光,康永林,赵爱民,于浩. 半固态高碳工具钢的变形特性[J]. 钢铁研究学报, 2004, 16(4): 57-60 |
| |
| 作者姓名： | 李激光 康永林 赵爱民 于浩 |
| |
| 作者单位： | 北京科技大学材料科学与工程学院,北京,100083 |
| |
| 基金项目： | 国家自然科学基金资助项目(50174003，59995440) |
| |
| 摘 要： | 采用Gleeble-1500热/力模拟机，对电磁搅拌法制备的高碳(碳含量大于1％)工具钢半固态坯料进行压缩实验，研究半固态高碳钢在不同变形温度、不同变形速率下的应力一应变关系，同时与相同冷却条件下的常规铸态坯料进行了对比分析。结果表明：在固一液两相区变形时，半固态坯料的流变应力明显低于常规铸态坯料，且随温度的升高而降低；当变形速率降低时，应力峰值升高，同时热软化现象明显。
|
| 关 键 词： | 高碳 工具钢 半固态 压缩变形 流变应力 |
| 文章编号： | 1001-0963(2004)04-0057-04 |
| 修稿时间： | 2002-12-03 |
Deformation Characteristics of Semi-Solid High Carbon Tool Steel |
| |
| LI Ji-guang,KANG Yong-lin,ZHAO Ai-min,YU Hao. Deformation Characteristics of Semi-Solid High Carbon Tool Steel[J]. Journal of Iron and Steel Research, 2004, 16(4): 57-60 |
| |
| Authors: | LI Ji-guang KANG Yong-lin ZHAO Ai-min YU Hao |
| |
| Abstract: | The compression deformation experiments on high carbon (carbon content>1 %) tool steel in semi-solid state created by electromagnetic stirring and solid state were carried out on Gleeble-1500 thermal simulator, and the relationship between the stress and strain of semi-solid steel at different deformation temperature and rate was studied. The results showed that the deformation resistance of semi-solid high carbon tool steel is considerably less than that of solid one, and the resistance decreases with the increase of temperature and its peak value increases with the decrease of deformation rate. |
| |
| Keywords: | high carbon tool steel semi-solid state compression deformation deformation resistance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
