首页 | 本学科首页   官方微博 | 高级检索  
     

四川某极低品位复杂铂铜镍矿浮选工艺
引用本文:石贵明,赵汝全,周意超.四川某极低品位复杂铂铜镍矿浮选工艺[J].有色金属科学与工程,2016(2):104-109.
作者姓名:石贵明  赵汝全  周意超
作者单位:1. 江西理工大学资源与环境工程学院,江西 赣州 341000; 江西省矿业工程重点实验室,江西 赣州 341000;2. 江西理工大学资源与环境工程学院,江西 赣州,341000
基金项目:江西省自然科学基金资助项目(20122BAB216020);江西理工大学校级重点课题(NSFJ2015-K02)
摘    要:针对四川甘孜某极低品位复杂铂铜镍矿石开展工艺矿物学分析,在此基础上进行磨矿细度、pH值调整剂种类及用量试验等条件研究,结果表明采用分支(三支)浮选工艺流程处理该低品位铂镍矿石后,可获品位为3.17%、回收率为43.49%的镍精矿,这种浮选流程针对品位极低的原矿,其选别指标是较好的.其中镍精矿中Cu、Co、Pt、Pd等元素均有一定程度的富集,随Ni一起得到综合利用.

关 键 词:极低品位  铂铜镍矿  分支浮选

Flotation of a very low grade platinum-copper-nickel ore in Sichuan
Abstract:Based on the process mineralogical of the platinum-copper-nickel ore, the condition experiments of grinding fineness, pH adjusting agent type and dosage and some other experiments were carried out. The re-sults show that with the branch flotation process, nickel concentrate with the grade of 3.17 %, recovery of 43.49%is obtained. Meanwhile, Cu, Co, Pt, Pd are enriched to some degree and comprehensively utilized with nickel concentrates.
Keywords:low grade  platinum-copper-nickel ore  branch flotation
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号