首页 | 本学科首页   官方微博 | 高级检索  
     

载流条件下Cu-Ag-Fe合金的摩擦磨损行为
引用本文:李勇,柳瑞清,许方.载流条件下Cu-Ag-Fe合金的摩擦磨损行为[J].江西有色金属,2011(3):18-22.
作者姓名:李勇  柳瑞清  许方
作者单位:国家铜冶炼及加工工程技术研究中心,江西赣州341000
基金项目:江西理工大学工程研究院创新基金项目(编号:JUST.GCY-2010-02)
摘    要:研究了电流强度、滑动速度和载荷对Cu-Ag-Fe合金的磨损性能的影响.结果表明:由于Fe元素的时效析出强化作用,Cu-Ag-Fe合金的电磨损性能比Cu-Ag合金高出2倍多,大大提高了该合金的使用寿命.随电流强度、滑动速度和载荷的增加,合金的质量磨损率明显增加.在受电滑动条件下,磨损形式以粘着磨损,磨粒磨损和电侵蚀磨损为主,并且随着电流强度的增加,粘着磨损现象加剧.

关 键 词:Cu-Ag-Fe合金  电流强度  滑动速度  载荷  滑动磨损

Tribological Behaviors of Cu-Ag-Fe Alloy Carrying Electric Current
LI Yong,LIU Rui-qing,XU Fang.Tribological Behaviors of Cu-Ag-Fe Alloy Carrying Electric Current[J].Jiangxi Nonferrous Metals,2011(3):18-22.
Authors:LI Yong  LIU Rui-qing  XU Fang
Affiliation:(National Research Center for Copper Smelting and Process Engineering Technology,Ganzhou 341000,China)
Abstract:This paper studies the influences of electrical current,sliding speed and load on the sliding wear of Cu-Ag-Fe alloy.The results show that the electrical sliding wear performance of Cu-Ag-Fe alloy increases more than 2 times than that of Cu-Ag alloy due to the aging strengthening action of Fe element,which greatly lengthens the service life of Cu-Ag-Fe alloy.With the increase of electrical current,sliding speed and load,the mass wear rate of Cu-Ag-Fe alloy dramatically increases.During the electrical sliding processes,the adhesive wear,abrasive wear and electrical erosion are the dominant mechanisms.The phenomena of the adhesive wear intensify with the adding electrical current.
Keywords:Cu-Ag-Fe alloy  electrical current  sliding speed  load  sliding wear
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号