Sintering of boron carbide containing small amounts of free carbon |
| |
Authors: | B L Grabchuk P S Kislyi |
| |
Affiliation: | (1) Institute of Materials Science, Academy of Sciences of the Ukrainian SSR, Ukraine |
| |
Abstract: | Conclusions A study was made of the sintering kinetics of grade ch. boron carbide, technical boron carbide cleaned of impurities, and boron carbide synthesized from the elements. An investigation was carried out also into the reactive sintering of a mixture of boron and carbon black. Reactive sintering fails to yield dense parts in boron carbide. The best sinterability is exhibited by a fine technical boron carbide powder cleaned of free carbon and other contaminants. Parts with a porosity of less than 5% can be produced from such a powder by pressing and subsequent sintering. However, it is not the presence of free carbon that controls the sintering behavior of boron carbide, since pure and synthesized boron carbide powders containing no free carbon are characterized by poor sinterability. The high activity of the technical powder is probably linked with the presence of structural defects and stresses generated in the course of its manufacture, during milling and quenching. The annealing spectrum of these defects covers a wide temperature range, and consequently the energy of activation for the densification of boron carbide steadily grows with increase in shrinkage.Translated from Poroshkovaya Metallurgiya, No. 7 (151), pp. 27–31, July, 1975. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|