| 基于Weibull分布的冲压模具用硬质合金耐冲击疲劳性能研究 |
| |
| 引用本文： | 李詠侠,刘再锋,郑峰,江自然.基于Weibull分布的冲压模具用硬质合金耐冲击疲劳性能研究[J].稀有金属与硬质合金,2012(4):50-55. |
| |
| 作者姓名： | 李詠侠 刘再锋 郑峰 江自然 |
| |
| 作者单位： | 中南大学粉末冶金国家重点实验室;中南大学材料科学与工程学院 |
| |
| 摘 要： | 通过小能量多次冲击方法研究了五种常用冲压模具用硬质合金的冲击疲劳行为,利用Weibull统计分布分析材料的冲击疲劳性能,采用扫描电镜观察断口形貌。试验结果表明:从硬质合金多次冲击疲劳试验的断口可观察到特征明显不同的三个区域——裂纹稳定生长的微粗糙区,裂纹激烈扩展的光亮区,最后断裂的平滑区。晶粒度1.4μm、钴含量20%的硬质合金,其耐冲击疲劳性能最好。
|
| 关 键 词： | 硬质合金 冲击疲劳 Weibull模量 晶粒度 钴含量 |
Research on Impact Fatigue Performance of Stamping Die Cemented Carbides Based on Weibull Distribution |
| |
| LI Yong-xia,LIU Zai-feng,ZHENG Feng,JIANG Zi-ran.Research on Impact Fatigue Performance of Stamping Die Cemented Carbides Based on Weibull Distribution[J].Rare Metals and Cemented Carbides,2012(4):50-55. |
| |
| Authors: | LI Yong-xia LIU Zai-feng ZHENG Feng JIANG Zi-ran |
| |
| Affiliation: | 1.State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China; 2.School of Materials Science and Engineering,Central South University,Changsha 410083,China) |
| |
| Abstract: | Impact fatigue performance of fine kinds of common stamping die cemented carbides was tested by small energy multiple impaction,and then analyzed based on Weibull distribution.Fracture surface was observed by SEM.The results show that there are three distinct areas on the fracture surface of the cemented carbide after multiple impaction,including a little rough region of stable crack growth,bright field of rapid crack propagation,and smooth area of final fracture.The impact fatigue performance is the best of WC-20%Co cemented carbide with an average grain size of 1.4 μm. |
| |
| Keywords: | cemented carbide impact fatigue Weibull modulus grain size Co content |
| 本文献已被 CNKI 等数据库收录！ |
