首页 | 本学科首页   官方微博 | 高级检索  
     

不同MgO含量对烧结矿质量的影响
引用本文:客海滨,张玉柱,王丽丽,邢宏伟.不同MgO含量对烧结矿质量的影响[J].河南冶金,2007,15(1):8-10,13.
作者姓名:客海滨  张玉柱  王丽丽  邢宏伟
作者单位:河北理工大学
摘    要:依据石钢原料条件,研究了MgO含量对烧结矿常温强度及冶金性能的影响.结果表明,MgO含量对烧结矿有着双重的影响,其中在2.3%为最佳.随着MgO的增加,烧结矿的冶金性能、低温还原粉化指标改善.当MgO含量达到2.3%时,烧结矿强度,性能指标达到最佳.随后,随MgO含量增加烧结矿强度及冶金性能明显降低.

关 键 词:烧结矿  MgO  冶金性能
收稿时间:2006-08-10
修稿时间:2006-08-10

EFFECT OF DIFFERENT CONTENTS OF MgO ON SINTER QUALITY
Ke Haibin,Zhang Yuzhu,Wang Lili,Xing Hongwei.EFFECT OF DIFFERENT CONTENTS OF MgO ON SINTER QUALITY[J].Henan Metallurgy,2007,15(1):8-10,13.
Authors:Ke Haibin  Zhang Yuzhu  Wang Lili  Xing Hongwei
Affiliation:Hebei Polytechnic University
Abstract:According to local materials of Shigang, The relations among MgO with cold strength and metallurgical properties of sinter are described in this paper. The results showed that MgO had an obvious influence, the feasible contents of MgO was 2. 3%. As the addition of MgO, melting property and the granularity of sinter and and -pulverization in low -temperature reduction were improved. And then,the sinter strength and metallurgical Property reduced obviously when the Mgo content increased.
Keywords:Sinter MgO Metallurgic performance
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号