| 火驱采油套管的试制开发 |
| |
| 引用本文： | 岳磊,田青超.火驱采油套管的试制开发[J].山东冶金,2010,32(3):53-55. |
| |
| 作者姓名： | 岳磊 田青超 |
| |
| 作者单位： | 1. 上海宝钢商贸有限公司,上海,201900
2. 宝钢研究院钢管研究所,上海,201900 |
| |
| 摘 要： | 根据火驱采油工作条件的特点,试制了复合添加Mo、W、V等合金元素的含Cr3%的火驱采油用BG80H-3Cr耐热套管。检测结果表明,所开发的产品在室温至450℃的使用温度范围内屈服强度均在API标准的N80钢级范围。在400℃加载250MPa的条件下未发生蠕变,550℃运行1万h的高温持久强度的理论值为169MPa。套管试样在550℃空气介质下的氧化速率为0.01g（/m2·h）,抗CO2腐蚀能力与普通N80套管相比提高11倍。
|
| 关 键 词： | 火烧油层 套管 CO2腐蚀 高温力学性能 |
Trial-manufacture Development of In-situ Combustion Oil Casing |
| |
| YUE Lei,TIAN Qing-chao.Trial-manufacture Development of In-situ Combustion Oil Casing[J].Shandong Metallurgy,2010,32(3):53-55. |
| |
| Authors: | YUE Lei TIAN Qing-chao |
| |
| Affiliation: | 1 Shanghai Baosteel Trading Co.,Ltd.,Shanghai 201900,China;2 The Steel Pipe Institute of Baosteel Research Institute,Shanghai 201900,China) |
| |
| Abstract: | According to the working conditions of the casing suitable for fireflood production,a BG80H-3Cr casing were prepared using a 3% Cr steel alloyed with Mo,W and V elements.The inspection results showed that the yield strength of the casing product ranges within the API specified N80 grade scope in use temperature ranges from room temperature to 450℃.Creep behavior did not occur at 400℃ loaded with 250 MPa and the creep rupture strength at 550℃ running 10000h was predicted to be 169 MPa.The oxidation rate of the prepared casing specimen was 0.01g（/m2·h）at 550℃ under air atmosphere.The CO2 corrosion resistance property was increased 10 times that common N80 casing. |
| |
| Keywords: | in-situ combustion casing CO2 corrosion high temperature mechanical property |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
