首页 | 本学科首页   官方微博 | 高级检索  
     

CSP生产Q235B钢的动态再结晶规律的研究
引用本文:宋畅,刘昌明,孔君华,吴润.CSP生产Q235B钢的动态再结晶规律的研究[J].钢铁研究,2012,40(5):16-18.
作者姓名:宋畅  刘昌明  孔君华  吴润
作者单位:1. 武汉钢铁(集团)公司研究院,湖北武汉,430080
2. 武汉科技大学材料与冶金学院,湖北武汉,430081
摘    要:为研究CSP工艺条件下钢的动态再结晶规律,利用Gleeble-1500热模拟实验机对CSP工艺生产的Q235B钢连铸坯进行了热模拟研究。研究结果表明,在较高变形温度和较低应变速率下Q235B钢容易发生动态再结晶,试验中Q235B钢发生动态再结晶的适宜条件为:变形温度970℃以上、应变速率在5/s以下。再结晶组织为铁素体和少量珠光体。通过热模拟数据的拟合分析,得出了其动态再结晶模型为Z=εexp(289.58/RT)。

关 键 词:CSP工艺  动态再结晶  热模拟  再结晶模型

Study on dynamic recrystallization of Q235B by CSP process
SONG Chang,LIU Chang-ming,KONG Jun-hua,WU Run.Study on dynamic recrystallization of Q235B by CSP process[J].Research on Iron and Steel,2012,40(5):16-18.
Authors:SONG Chang  LIU Chang-ming  KONG Jun-hua  WU Run
Affiliation:1. Research and Development Center of WISCO,Wuhan 430080, China; 2. College of Materials and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081 ,China)
Abstract:The dynamic recrystallization behavior of thin slab of Q235B produced by CSP process is investigated using Gleeble-1500 thermal simulation tester. It is revealed that the dynamic reerystallization is more likely to occur with the increase of deformation temperature and the decrease of strain rate. Suitable conditions for the dynamic recrystallization include deformation temperature over 970 ℃ and deformation rate below 5/s. The recrystallization structure consists of ferrite and a little pearlite. In addition, the dynamic recrystallization model is Z = εexp (289. 58/RT) which is established by the regression analysis of the simulation data.
Keywords:CSP  dynamic recrystllization  thermal simulation  dynamic recrystallization model
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号