首页 | 本学科首页   官方微博 | 高级检索  
     

过共析钢线材组织与性能的控制
引用本文:罗德信,蒋跃东,桂江兵. 过共析钢线材组织与性能的控制[J]. 钢铁研究, 2009, 37(5): 10-13
作者姓名:罗德信  蒋跃东  桂江兵
作者单位:武汉钢铁,集团,公司,研究院,湖北,武汉,430080
摘    要:采用热/力物理模拟和微观分析相结合的方法研究了过共析钢在连续冷却过程中的固态相变和热加工工艺对钢的组织性能影响,结果表明,变形温度降低120℃,引起相变温度升高22℃;冷却速度提高到15℃/s,使得相变温度下降了90℃;提高变形温度有利于增加抗拉强度,但断面收缩率呈现下降趋势。试验结果用于生产过程优化和控制,使线材的合格率达到95%以上。

关 键 词:过共析钢  线材  固态相变  组织

Control of microstructures and properties of hypereutectoid steel wire rods
LUO De-xin,JIANG Yue-dong,GUI Jiang-bing. Control of microstructures and properties of hypereutectoid steel wire rods[J]. Research on Iron and Steel, 2009, 37(5): 10-13
Authors:LUO De-xin  JIANG Yue-dong  GUI Jiang-bing
Affiliation:LUO De-xin,JIANG Yue-dong,GUI Jiang-bing(Research and Development Center of WISCO,Wuhan 430080,China)
Abstract:The effects of solid-state phase transformation and hot working procedure on the microstructures and properties of hypereutectoid steel were investigated by means of thermal-mechanical simulation method combined with micro-analysis.Experimental results show that the transformation temperature increases with the decrease of deformation temperature.When the cooling rate is accelerated,the transformation temperature decreases.The increase of deformation temperature facilitates to enhance the tensile strength o...
Keywords:hypereutectoid steel  wire rods  solid-state transformation  structure  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号