| 关于在管坯尾端增加定心工序的探讨 |
| |
| 引用本文： | 乔爱云,井溢农.关于在管坯尾端增加定心工序的探讨[J].包钢科技,2004,30(6):40-42. |
| |
| 作者姓名： | 乔爱云 井溢农 |
| |
| 作者单位： | 包钢钢联股份有限公司连轧钢管厂,内蒙古,包头,014010;包钢钢联股份有限公司连轧钢管厂,内蒙古,包头,014010 |
| |
| 摘 要： | 限动芯棒连轧管机组采用芯棒做为内变形工具,穿孔后的毛管尾端产生"铁耳子",损伤芯棒表面和荒管内表面.增加管坯尾端定心设备后,可在管坯尾端加工出一个中心孔,消除铁耳子,提高芯棒使用寿命,改善钢管内表面质量.
|
| 关 键 词： | 管坯尾端 增加 定心工序 |
| 文章编号： | 1009-5438(2004)06-0040-03 |
Discussion about adding a billet end centralizing equipment |
| |
| QIAO Ai- yun,JING Yi - nong.Discussion about adding a billet end centralizing equipment[J].Science & Technology of Baotou Steel(Group) Corporation,2004,30(6):40-42. |
| |
| Authors: | QIAO Ai- yun JING Yi - nong |
| |
| Abstract: | As an internal deformation tool of multi - stand pipe mill, the mandrel will make the ' steel chip' at the end of a billet and that will damage the mandrel and the pipe internal surfaces. After adding a billet end centralizing equipment, the' steel chip' is eliminated, and the life of mandrel and the surface quality of the pipe is prolonged and improved respectively. |
| |
| Keywords: | add billet end centralizing equipment |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
