| 合金元素对0Cr17Ni4Cu4Nb不锈钢组织与力学性能的影响—铜（3） |
| |
| 引用本文： | 李许明,杨钢,黄爱华,马凤春,宋玺玉.合金元素对0Cr17Ni4Cu4Nb不锈钢组织与力学性能的影响—铜（3）[J].特钢技术,2011(1):6-12,15. |
| |
| 作者姓名： | 李许明 杨钢 黄爱华 马凤春 宋玺玉 |
| |
| 作者单位： | 钢铁研究总院结构材料研究所;沈阳黎明发动机制造公司; |
| |
| 摘 要： | 实验室研究了Cu含量对0Cr17Ni4Cu4Nb不锈钢组织与力学性能的影响,通过力学性能测试和金相显微分析,研究结果表明：在淬火冷却速度较快的情况下,随Cu含量的增加,强度增加,塑性下降;随淬火冷却速度的降低,强度下降,且Cu含量越高,强度下降的幅度越大;在淬火缓冷情况下,Cu含量对强度的影响不大;随时效后冷却速度的降低,强度增加;Cu含量控制在中下限容易满足技术条件的要求。
|
| 关 键 词： | Cu含量 0Crl7Ni4Cu4Nb 力学性能 合金元素 |
Effect of Alloy Element on Microstructure and Mechanical Properties of 0Cr17Ni4Cu4Nb Stainless Steel-Copper(3) |
| |
| Li Xuming ,Yang Gang ,Huang Aihua ,MA Fengchun ,Song Xiyu.Effect of Alloy Element on Microstructure and Mechanical Properties of 0Cr17Ni4Cu4Nb Stainless Steel-Copper(3)[J].Special Steel Technology,2011(1):6-12,15. |
| |
| Authors: | Li Xuming [] Yang Gang [] Huang Aihua [] MA Fengchun [] Song Xiyu [] |
| |
| Affiliation: | Li Xuming [1],Yang Gang [2],Huang Aihua [1],MA Fengchun [1],Song Xiyu [1](1.Institute for Structural Materials of Central Iron and Steel Research Institute,Beijing,100081,2.Shenyang Liming Engine Manufacturing Co.,Shenyang 110043,China) |
| |
| Abstract: | Effect of Cu content on the microstructures and mechanical properties was studied experimentally on stainless steel 0Cr17Ni4Cu4Nb by means of optical micrograph and mechanical property tests.The result shows that the strength would be increased and the ductility would be decreased with the increasing of Cu content in the case of fast cooling rate during quenching.The strength would be decreased with the slowing of the cooling rate during quenching,and reduced more in degree as increasing the Cu content,and ... |
| |
| Keywords: | Cu content 0Crl7Ni4Cu4Nb Mechanical property Alloy element |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
