首页 | 本学科首页   官方微博 | 高级检索  
     

合金元素对0Cr17Ni4Cu4Nb不锈钢组织与力学性能的影响—碳(1)
引用本文:杨钢,刘军和,冯贞伟,李许明,方波,宋玺玉.合金元素对0Cr17Ni4Cu4Nb不锈钢组织与力学性能的影响—碳(1)[J].特钢技术,2010(3).
作者姓名:杨钢  刘军和  冯贞伟  李许明  方波  宋玺玉
作者单位:钢铁研究总院结构材料研究所;沈阳黎明发动机制造公司;
摘    要:实验室研究了C含量对0Cr17Ni4Cu4Nb不锈钢组织与力学性能的影响,通过力学性能测试和金相显微分析,研究结果表明:随C含量的增加,As点、Mf点降低,且Mf点可降到室温以下,导致强度降低,塑性、韧性增加;随淬火冷却速度的降低,强度降低,塑性增加;随时效冷却速度的降低,强度增加;选择低的C含量容易满足技术条件要求。

关 键 词:C含量  0Crl7Ni4Cu4Nb  力学性能  合金元素  

Effect of Alloy Element on Microstructure and Mechanical Properties of 0Cr17Ni4Cu4Nb Stainless Steel Carbon(1)
Yang Gang,Liu Junhe,Feng Zhenwei,Li Xuming,Fang Bo,Song Xiyu.Effect of Alloy Element on Microstructure and Mechanical Properties of 0Cr17Ni4Cu4Nb Stainless Steel Carbon(1)[J].Special Steel Technology,2010(3).
Authors:Yang Gang  Liu Junhe  Feng Zhenwei  Li Xuming  Fang Bo  Song Xiyu
Affiliation:Yang Gang1,Liu Junhe,Feng Zhenwei2,Li Xuming2,Fang Bo2,Song Xiyu2(1.Institute for Structural Materials of Central Iron and Steel Research Institute,Beijing,100081,2.Shenyang Liming Engine Manufacturing Co.,Shenyang 110043,China)
Abstract:Effect of C content on microstructures and mechanical properties was studied experimentally on stainless steel 0Cr17Ni4Cu4Nb by means of optical micrograph and mechanical property tests.The result shows that the phase transformation points of both As and Mf would be reduced with the increasing of C content,and the Mf point could be reduced to RT below,which result in the decrease of strength and the increase of both ductility and toughness.The strength would be decreased and the ductility would be increased...
Keywords:C content  0Crl7Ni4Cu4Nb  Mechanical property  Alloy element  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号