首页 | 本学科首页   官方微博 | 高级检索  
     

导流洞改为旋涡式竖井溢洪道综合研究
引用本文:董兴林 鲁慎吾. 导流洞改为旋涡式竖井溢洪道综合研究[J]. 水力发电, 1995, 0(3): 32-37
作者姓名:董兴林 鲁慎吾
作者单位:中国水利水电科学研究院,成都勘测设计研究院
基金项目:国家“八五”科技攻关项目
摘    要:结合我国一些水电站工程,对导流洞改建为旋涡式竖井溢洪道进行了综合研究。首次采用了压力短进水口出流为急流的引水道分别同涡井和涡室两种旋涡结构的连接型式,通过水工模型试验优选涡井(室)体型,并系统地研究其设计方法和水力学特性,为今后旋涡式竖井溢洪道设计提供了依据。

关 键 词:竖井式溢洪道 导流洞 涡室 涡井 环状水跃

Study on transferring diversion tunnels into vortex type of vertical shaft spillways
Dong Xinglin,Gao Jizhang. Study on transferring diversion tunnels into vortex type of vertical shaft spillways[J]. Water Power, 1995, 0(3): 32-37
Authors:Dong Xinglin  Gao Jizhang
Affiliation:Dong Xinglin;Gao Jizhang(China Institute of Water Resources and Hydropower Research)Lu ShenWu; Zhong Yongjina (Chengdu Hydropower Investigation and Design Institute)
Abstract:In combination with some hydro projects's practice, an integrated study was conducted to change diversion tunnels into vortex type vertical shaft spillways. It is the first time to use short pressure headrace tunnel and speed out flow combined with a vortex structure of volute well or volute chamber. The well (chamber) was optimally designed through hydraulic modeling. Its hydraulic characteristics and its design were systematically observed to provide the design of vortex vertical shaft spillways with a scientific basis.
Keywords:volute well   volute chamber   circular hydraulic jump
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号