| 钢模台车在万家寨引黄总干三级泵站压力输水隧洞中的应用 |
| |
| 引用本文： | 王树林,兰艇雁,李创林.钢模台车在万家寨引黄总干三级泵站压力输水隧洞中的应用[J].山西水利科技,2001(3):25-27. |
| |
| 作者姓名： | 王树林 兰艇雁 李创林 |
| |
| 作者单位： | 山西省水利勘测设计研究院驻引黄监理部 |
| |
| 摘 要： | 万家寨引黄工程总干三级泵站出水压力输水隧洞总和工350．45m,洞径3．80－5．20m,断面设计为圆形。隧洞由前后两段构成,平面量“Y”形布置。在衬砌混凝土浇筑时由于采用自行加工的轻型钢模台车,不仅提高了工程质量和进度,而且降低了成本。是一种可在其同类工程中广泛推广应用的先进施工工艺。
|
| 关 键 词： | 输水隧洞 钢模台车 混凝土 衬砌 泵站 万家寨引黄工程 |
| 文章编号： | 1006-8139(2001)03-0025-03 |
| 修稿时间： | 2001年5月28日 |
Application of Steel Form Jack Plane In Pressurized Tunnel of Third Pumping Station, the GML of the YRDP |
| |
| Wang Shulin,Lan Tingyan,Li Chuanglin.Application of Steel Form Jack Plane In Pressurized Tunnel of Third Pumping Station, the GML of the YRDP[J].Shanxi Hydrotechnics,2001(3):25-27. |
| |
| Authors: | Wang Shulin Lan Tingyan Li Chuanglin |
| |
| Affiliation: | Wang Shulin Lan Tingyan Li Chuanglin |
| |
| Abstract: | The pressurized tunnel of the third pumping station,the General Main Line of the YRDP is 350.45 m in total length,and 3.50-5.20m in diameter,its cross seciton is designed to be circular.The tunnel consists of the former section and the later section, being in "Y" plan layout.The light steel form jack plane manufactured by themselves has been used in pouring of the lining concrete,which not only improves the quality and progress of the project,but also decreases the cost.It is an advanced construction technology that can be widely popularized in other similar works. |
| |
| Keywords: | Application Steel Form Jack Plane Pressurized Tunnel Concrete Placement |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
