| 压滤机过滤板成型工艺设计 |
| |
| 引用本文： | 高蕊,王燕,李岩.压滤机过滤板成型工艺设计[J].工程塑料应用,2005,33(8):25-27. |
| |
| 作者姓名： | 高蕊 王燕 李岩 |
| |
| 作者单位： | 济南大学土建学院,济南,250022;济南大学土建学院,济南,250022;济南大学土建学院,济南,250022 |
| |
| 摘 要： | 针对某厂生产的改性聚丙烯过滤板存在的质量问题，提出了新的过滤板成型工艺。对原材料的干燥与配混，挤出造粒，过滤板模压时的预热、保压、固化、脱模及后处理等工艺进行了详尽的说明。通过此工艺加工过滤板，产品质量有明显提高，且大大降低了成本。现场试验表明，该工艺生产的过滤板有较好的使用性能。
|
| 关 键 词： | 改性聚丙烯 过滤板 造粒工艺 模压成型 |
| 收稿时间： | 2005-06-08 |
| 修稿时间： | 2005年6月8日 |
FORMING TECHNIQUE DESIGN OF FILTER BOARD FOR PRESSURE FILTER |
| |
| Gao Rui,Wang Yan,Li Yan.FORMING TECHNIQUE DESIGN OF FILTER BOARD FOR PRESSURE FILTER[J].Engineering Plastics Application,2005,33(8):25-27. |
| |
| Authors: | Gao Rui Wang Yan Li Yan |
| |
| Abstract: | Aiming at the quality problems of modified polypropylene(PP) filter plates in a certain factory,a new forming technology is put forward.The drying and blending of raw materials,the extruding and prilling process,the mould pressing and post-treatment and so on are elaborated.The product quality is obviously improved and the cost is greatly decreased by using this new technology.The autoptic results show that the filter plates produced by this technology have good performance. |
| |
| Keywords: | modified polypropylene filter plate granulating technology pressing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
